PTFE Tube,China PTFE Tube Suppliers and Manufacturers at Kaxite Sealing

PTFE Products

PTFE Tube,You Can Buy Various High Quality PTFE Tube Products from Global PTFE Tube Suppliers and PTFE Tube Manufacturers at Kaxite Sealing.
More
  • Glass fibre is used as a PTFE filler as it offers much improved compression and wear properties. The material may also be inert gas sintered to further improve creep properties and reduce porosity and gas permeability (there would be a consequent loss of tensile properties).

  • PTFE Carbon Filled has good chemical resistance to corrosive environments, has better creep and wear resistance compared to standard PTFE materials. These properties are improved with the addition of a carbon filler. This filler improves dimensional stability, raises the heat deflection temperature, improves creep resistance and the dynamic bearing performance. PTFE Carbon Filled exhibits good initial wear and rubbing/sliding contact characteristics in both dry and wet/water applications. It is frequently used in piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surface

  • PTFE Carbon Filled has good chemical resistance to corrosive environments, has better creep and wear resistance compared to standard PTFE materials. These properties are improved with the addition of a carbon filler. This filler improves dimensional stability, raises the heat deflection temperature, improves creep resistance and the dynamic bearing performance. PTFE Carbon Filled exhibits good initial wear and rubbing/sliding contact characteristics in both dry and wet/water applications. It is frequently used in piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surface

  • This tubing also serves numerous applications in the automotive, electrical and appliance markets. We careful selection of resin type, particle size, temperature and pressure produces smooth and dimensionally stable tubing

  • This tubing also serves numerous applications in the automotive, electrical and appliance markets. We careful selection of resin type, particle size, temperature and pressure produces smooth and dimensionally stable tubing

  • FEP Tubing (Fluorinated Ethylene Propylene) is the preferred material in production of small diameter tubing of continuous lengths.

  • FEP Tubing (Fluorinated Ethylene Propylene) is the preferred material in production of small diameter tubing of continuous lengths. While some temperature resistance is sacrificed with FEP (to 400º F), its chemical and dielectric properties are similar to those of PTFE.

  • PFA (PerFluoroAlkoxy) tubing offers similar properties to FEP, but is considered more of a premium resin. PFA is preferred when extended service is required in hostile environments involving chemical, thermal, and mechanical stress

  • Polyimide refers to a class of synthetic polymers. Adding polyimide produces a PTFE compound that is lower in friction than all of those previously described. It is non-abrasive, making it a good choice for applications involving softer mating surfaces like steel, aluminium, or other plastics. Polyimide filled PTFE therefore suits dry running and stop-start applications particularly well. However, polyimide is the priciest of the PTFE fillers.

Pre  1  2  Next