PTFE Tube

PTFE Tube,You Can Buy Various High Quality PTFE Tube Products from Global PTFE Tube Suppliers and PTFE Tube Manufacturers at Kaxite Sealing.
More
  • Molded PTFE Tube OD: 30mm to 600mm Length: 10mm to 300mm/pc we have virgin molded ptfe tube, filled molded ptfe tube, fiber glass molded ptfe tube, graphite filled molded ptfe tube, bronze filled molded ptfe tube.

  • PTFE moulded tube can be made into non-standard parts by mechanical working, also it can be used as non-sticking materials. It can be used at the temperature of -180℃~+260℃. It has the lowest frictional factor and the best anti-corrosive property among the known plastic materials.

  • Glass fibre is used as a PTFE filler as it offers much improved compression and wear properties. The material may also be inert gas sintered to further improve creep properties and reduce porosity and gas permeability (there would be a consequent loss of tensile properties).

  • PTFE Carbon Filled has good chemical resistance to corrosive environments, has better creep and wear resistance compared to standard PTFE materials. These properties are improved with the addition of a carbon filler. This filler improves dimensional stability, raises the heat deflection temperature, improves creep resistance and the dynamic bearing performance. PTFE Carbon Filled exhibits good initial wear and rubbing/sliding contact characteristics in both dry and wet/water applications. It is frequently used in piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surface

  • The addition of Bronze to PTFE gives better dimensional stability and lowers creep, cold flow and wear. It increases hardness and compressive strength whilst also increasing thermal and electrical conductivity

  • Graphite filled PTFE has exceptional chemical resistance to corrosive environments and it is compatible with most hydraulic fluids. PTFE. Graphite Filled exhibits good initial wear and rubbing/sliding characteristics in dry and water applications. Excellent performance when used for hydraulic or pneumatic compression type rod and piston seals, bearing bands and rotary applications. Graphite is commonly blended with carbon and PTFE (Teflon)

  • The addition of Bronze to PTFE gives better dimensional stability and lowers creep, cold flow and wear. It increases hardness and compressive strength whilst also increasing thermal and electrical conductivity

  • 40% Bronze Powder Filled Teflon PTFE Tube Product number:KXT BU980-40 Quick Overview: The addition of Bronze to PTFE gives better dimensional stability and lowers creep, cold flow and wear. It increases hardness and compressive strength whilst also increasing thermal and electrical conductivity

  • The addition of Bronze to PTFE gives better dimensional stability and lowers creep, cold flow and wear. It increases hardness and compressive strength whilst also increasing thermal and electrical conductivity

  • Glass fibre is used as a PTFE filler as it offers much improved compression and wear properties. The material may also be inert gas sintered to further improve creep properties and reduce porosity and gas permeability (there would be a consequent loss of tensile properties).

Pre  1  2  Next