All Products

  • Easy To Use Xpert Mitre Shears, Great Tool For Glazer Cuts Through Trims, Upvc Gasket, Conduit, Beading, Plastic Pipe and Picture Moldings

  • PTFE Bearing Strip Teflon Guide Tape owing to the low friction of fluorocarbon resin (PTFE), corrosion resistance, thermal stability and other excellent properties, has been widely used in friction, sealing parts, especially in the corrosive medium, and the problem is often difficult to be solved by general metal and other non-metallic materials. The elasticity and toughness of fluorocarbon resin to become excellent sealing material

  • Carbon filled has better creep and wear resistance compared to standard PTFE Rod. These properties are improved with the addition of a carbon filler. This filler improves dimensional stability, raises the heat deflection temperature, improves creep resistance and the dynamic bearing performance

  • PTFE Bronze Filled is the most common metal filler and it is dark brown in color. Bronze filler has excellent wear, creep resistance, and higher thermal conductivity that glass fiber with PTFE

  • PTFE moulded tube can be made into non-standard parts by mechanical working, also it can be used as non-sticking materials. It can be used at the temperature of -180℃~+260℃. It has the lowest frictional factor and the best anti-corrosive property among the known plastic materials.

  • PTFE Bronze Filled is the most common metal filler and it is dark brown in color. Bronze filler has excellent wear, creep resistance, and higher thermal conductivity that glass fiber with PTFE.

  • We offer high quality 25% glass Filled Rod to our esteemed customers. These products are ideally suited for the manufacture of corrosion-resistant gaskets and seals

  • Glass fibre is used as a PTFE filler as it offers much improved compression and wear properties. The material may also be inert gas sintered to further improve creep properties and reduce porosity and gas permeability (there would be a consequent loss of tensile properties).

  • PTFE Carbon Filled has good chemical resistance to corrosive environments, has better creep and wear resistance compared to standard PTFE materials. These properties are improved with the addition of a carbon filler. This filler improves dimensional stability, raises the heat deflection temperature, improves creep resistance and the dynamic bearing performance. PTFE Carbon Filled exhibits good initial wear and rubbing/sliding contact characteristics in both dry and wet/water applications. It is frequently used in piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surface

  • The addition of Bronze to PTFE gives better dimensional stability and lowers creep, cold flow and wear. It increases hardness and compressive strength whilst also increasing thermal and electrical conductivity

Pre  27  28  29  30  31  32  33  Next