Spiral wound gasket 316 stainless steel Metal winding strips
Spiral wound gasket is made of V-shaped or W-shaped metallic strip with soft non-metallic filler such as Graphite, PTFE, Mica by spiral winding, and connected the end by spot welding. In addition spiral wound gasket, we can supply Flat or V or W-Shape Stainless Steel Metallic Strip Tape for Spiral Wound Gasket separately. Flat Stainless Steel Metallic Strip Tape also can be for Double jacketed gaskets, and eyelets of gaskets. You can have Spiral wound gasket 316 stainless steel Metal winding strips from us Kaxite
Features
Flat or V or W-Shape Metallic tape for making Spiral wound gasket. Flat metallic tape also can be used for double jacketed gaskets, and eyelets of gaskets
The materials can be 304(L), 316(L), 321, 317L, 31803, Mon 400, Ti, Inconel, Hast. C/B, Zr702, etc.
Available Size:
Thickness: 0.15~0.20 mm
Width: 2.5 mm~100 mm
4.8~5.3 mm/3.6~4.0 mm is for 4.5/3.2 mm of SWG
Materials for V-shape metal stainless steel strip for making spiral wound gasket
Materials | Acronym mark | Hardness (HB) | Temperature (°C) |
321 SS | 321 | 130-190 | -195 - +760 |
304 SS | 304 | 130-180 | -195 - +760 |
CS(Carbon steel) | CS | 120 | -40 - +540 |
304L SS | 304 | 130-180 | -195 - +760 |
316L SS | 316L | 130-180 | -100 - +760 |
317L SS | 317L |
|
-100 - +760 |
347 SS | 347 |
|
-185 - +760 |
HASTELLOY-B2 | HAST B | 215 | -185~+1090 |
20CB-3(ALLOY 20) | A-20 |
|
-185~+1090 |
HASTELLOY-C276 | HAST C |
|
-185~+1090 |
TITANIUM (钛) | TI | 215 | -195~+1090 |
NICKEL-200 (镍) | NI |
|
-195~+760 |
INCOLOY-800 | IN 800 |
|
-100~+870 |
INCOLOY-825 | IN 825 |
|
-100~+870 |
INCONEL-600 | INC 600 | 150 | -100~+1090 |
INCONEL-625 | INC 625 |
|
-100~+1090 |
INCONEL-X750 | INX |
|
-100~+1090 |
MONEL-400 | MON | 150 | -130~+82 |
Material |
Dielectric strength |
Compressive strength |
Water absorption |
Tensile strength |
Operating temp (oC) |
Plain Phenolic |
500 vpm |
25000 psi |
1.6% |
20000 psi |
-54-104 |
Neoprene Faced Phenolic |
500 vpm |
25000 psi |
1.6% |
20000 psi |
-54-79 |
Reinforced PTFE |
350 vpm |
2300 psi |
0.01% |
1450 psi |
-196-260 |
G7 |
350 vpm |
40000 psi |
0.07% |
25000 psi |
-196 to 232 |
G10 |
550 vpm |
50000 psi |
0.1% |
45000 psi |
-196 to 138 |
G11 |
550 vpm |
50000 psi |
0.1% |
43000 psi |
-196 to176 |
Seal Material |
NBR |
Viton |
Teflon |
Neoprene |
EPDM |
Operating temp oF |
-40-260 |
-20-350 |
-30-450 |
-40-250 |
-40-250 |
Operating temp oC |
-40-120 |
-29-177 |
-196-232 |
-40-120 |
-40-120 |
Sleeve material |
Dielectric strength |
Water absorption |
Low operating temp |
Max operating temp |
Max operating temp |
Mylar |
4000 vpm |
0.8% |
-59 oC |
300 F |
149 oC |
Nomex |
400 vpm |
/ |
-54 oC |
450 F |
232 oC |
G7 |
350 vpm |
0.1% |
-196 oC |
450 F |
232 oC |
G10 |
550 vpm |
0.1% |
-128 oC |
302 F |
150 oC |
G11 |
550 vpm |
0.1% |
-45 oC |
392 F |
202 oC |
Washer material |
Dielectric strength |
Compressive strength |
Water absorption |
Tensile strength |
Max operating temp |
Phenolic |
500 vpm |
25000 psi |
1.6% |
20000 psi |
105 oC |
Mica |
400 vpm |
30000 psi |
0.01% |
32000 psi |
700 oC |
G7 |
350 vpm |
40000 psi |
0.07% |
25000 psi |
232 oC |
G10 |
800 vpm |
65000 psi |
0.1% |
50000 psi |
150 oC |
G11 |
900 vpm |
50000 psi |
0.1% |
43000 psi |
202 oC |
Medium |
Retainer |
Seal |
Sleeve |
Washer |
Temp oF |
Temp oC |
Acetone |
Phenolic |
EPDM |
Mylar |
Phenolic |
+32 - +80 |
0 - +27 |
Air |
G-10 |
Nitrile |
Mylar |
Phenolic |
-40 - +225 |
-40 - +107 |
Ammonia Dry |
G-10 |
Teflon |
Mylar |
G 10 |
-65 - +220 |
-54 - +104 |
Ammonia (Wet) |
G-10 |
Teflon |
Mylar |
G 10 |
+32 - +100 |
0 - +38 |
Bleach |
G-10 |
Teflon |
Mylar |
G 10 |
+32 - +80 |
0 - +27 |
Butylene (Butidiene) |
G-10 |
Teflon |
G 10 |
Mylar |
+32 - +100 |
0 - +38 |
Carbon Dioxide |
G10 |
Nitrile |
Mylar |
G 10 |
+32 - +150 |
0 - +66 |
NaOH |
Consult from us |
|||||
Cryogenic |
G-10 |
Teflon |
G 10 |
G 10 |
-300 - +280 |
-184 - +138 |
Ethanol |
G-10 |
EPDM |
Mylar |
G 10 |
+32 - +100 |
0 - +38 |
Ethylene |
G-10 |
Teflon |
G 10 |
G 10 |
+32 - +80 |
0 - +27 |
Fuel Oil |
G-10 |
Viton |
Mylar |
G 10 |
-20 - +280 |
-29 - +138 |
Gas, Natural |
Phenolic |
Nitrile |
Mylar |
Phenolic |
-40 - +220 |
-40 - +104 |
Gas, Sour |
G-10 |
Viton |
Mylar |
Phenolic |
-20 - +220 |
-29 - +104 |
Gasoline |
G-10 |
Teflon |
Mylar |
G 10 |
-65 - +225 |
-54 - +107 |
Hydrogen |
G-10 |
Nitrile |
Mylar |
G 10 |
-40 +250 |
-40 - +121 |
Jet Fuel |
G-10 |
Viton |
Mylar |
G 10 |
-20 - +225 |
-29 - +107 |
LNG |
G-11 |
Teflon |
G 10 |
G 10 |
-300 - +100 |
-184 - +38 |
Mercaptan |
G-10 |
Teflon |
G 10 |
G 10 |
-20 - +80 |
-29 - +27 |
Methanol |
G-10 |
Teflon |
Mylar |
G 10 |
+32 - +100 |
0 - +38 |
MTBE |
Phenolic |
HNBR |
G 10 |
G 10 |
+32 - +80 |
0 - +27 |
Nitrogen |
G-10 |
Nitrile |
Mylar |
Phenolic |
-40 - +220 |
-40 - +104 |
Oil, Crude |
G-10 |
Viton |
Mylar |
G 10 |
-20 - +280 |
-29 - +138 |
Oxygen |
G-10 |
Teflon |
G 10 |
G 10 |
-65 - +250 |
-54 - +121 |
Pentane |
G-10 |
Teflon |
G 10 |
G 10 |
+32 - +80 |
0 - +27 |
Propane |
G-10 |
Teflon |
G 10 |
G 10 |
+32 - +80 |
0 - +27 |
Propylene |
G-10 |
Viton |
G 10 |
G 10 |
+32 - +80 |
0 - +27 |
Sewage |
G-10 |
Viton |
Mylar |
G 10 |
-20 - +280 |
-29 - +138 |
Spent Liquor |
G-10 |
Teflon |
G 10 |
G 10 |
+32 - +100 |
0 - +38 |
Steam |
Consult from us |
|||||
Styrene |
G-10 |
Teflon |
G 10 |
G 10 |
+32 - +80 |
0 - +27 |
Sulphur (Molten) |
G-10 |
Teflon |
G 10 |
G 10 |
+32 - +280 |
0 - +138 |
Tolulene |
G-10 |
Viton |
G 10 |
G 10 |
+32 - +150 |
0 - +66 |
Hot Water |
G-10 |
EPDM |
Mylar |
G 10 |
+175 - +280 |
+79 - +138 |
Water (Potable) |
G-10 |
EPDM |
Mylar |
G 10 |
+32 - +280 |
0 - +138 |
Water (Sea) |
G-10 |
EPDM |
G 10 |
G 10 |
+32 - +280 |
0 - +138 |
General data |
Temperature class |
axis electrical strength in oil at 90 oC |
Axial electrical strength in oil at 90 oC |
Insulation resistance after 24 hrs in water |
Water absortion |
Cohesion bettwen layers |
Standard density |
Item name |
Glass with epoxy resin tube |
130 |
8 |
45 |
103 |
1.5 |
350 |
1.8 |
G10 |
Fine glass with epoxy tube |
155 |
9 |
70 |
105 |
0.4 |
400 |
1.7 |
G11 |
Glass with epoxy resin tube |
155 |
9 |
75 |
104 |
0.3 |
350 |
1.8 |
G11 |
Glassfiber with silicon resin |
220 |
8 |
45 |
104 |
0.2 |
160 |
1.65 |
G7 |
Glass with polyester resin |
130 |
6 |
35 |
103 |
0.6 |
230 |
1.7 |
|
Glassfiber with Silicon resin |
220 |
8 |
45 |
104 |
0.2 |
160 |
1.65 |
G7 |
Glass with melamine resin |
155 |
6 |
30 |
105 |
2 |
220 |
1.8 |
G5 |