Non-Asbestos Jointing Sheets KNNY300 is a compressed, asbestos-free sealing sheet made from special heat-resistant fibre, heat-resistant packing material and natural rubber compound by heating and compression molding. It is designed as a direct substitute for the corresponding models of asbestos rubber sheet and is used for water, steam and general pipeline flange sealing. The KNNY300 grade in particular offers excellent oil sealing performance and is rated for a 15 MPa oil test without leaking, making it a strong choice for oil-bearing media and flange joints where a reliable, safe and asbestos-free material is required.
Non-Asbestos Jointing Sheets KNNY300 are compressed, asbestos-free sealing sheets made from special heat-resistant fibre, heat-resistant packing material and natural rubber compound by heating and compression molding. The result is a dense, resilient sheet that forms a reliable seal under bolt load and recovers well as the load changes, which is essential for pipeline flanges subject to thermal cycling.
The KNNY300 grade is engineered specifically for oil-bearing media. Its oil sealing performance is verified by a 30-minute dip test in 75# aviation gasoline at 15–30 °C and a 15 MPa oil pressure test — both must show no leaking. It also passes a 5-hour dip test in No.20 aviation oil at 150 ± 2 °C, and a 5-hour dip test in No.75 aviation oil at 15–30 °C, both with no cracking and no bubbling. Compared with asbestos rubber sheet, KNNY300 offers equivalent sealing performance without the health and environmental risks associated with asbestos, and it is fully compliant with international restrictions on asbestos-containing materials.
| Property | Value |
|---|---|
| Tensile strength | ≥12.0 MPa |
| Aging coefficient | 0.9 |
| Density | 1.6–1.8 g/cm³ |
| Compressibility | 12 ± 7 % |
| Rebound degree | 50 |
| Pliability | No crack |
| Stress relaxation | 30 |
| Oil sealing (75# aviation gasoline, 15–30 °C, 30 min) | 15 MPa pressure, no leaking |
| Tensile strength reduction after No.20 aviation oil dip at 150 ± 2 °C for 5 h | 25 % |
| Thickness increase after No.20 aviation oil dip | 5–18 % |
| Appearance change after No.20 aviation oil dip | No bubble |
| Tensile strength after No.75 aviation oil dip at 15–30 °C for 5 h | 8 MPa |
| Thickness increase after No.75 aviation oil dip | 5–20 % |
| Pliability after No.75 aviation oil dip | No crack |
Working pressure: 1.5 MPa for general service. Working temperature: up to +200 °C. Values are typical for standard production; confirm the exact grade against your flange rating and process conditions.
Kaxite supplies the full family of non-asbestos jointing sheets, so the correct grade can be selected to match your flange rating, medium and temperature. The table below lists the tensile strength of each grade for reference.
| Grade | Tensile Strength (MPa) | Density (g/cm³) | Rebound Degree | Stress Relaxation |
|---|---|---|---|---|
| KNXB200 | 5.0 | 1.6–2.0 | 35 | 45 |
| KNXB300 | 7.0 | 1.6–2.0 | 40 | 45 |
| KNXB350 | 11.0 | 1.6–2.0 | 45 | 45 |
| KNNY150 | 8.0 | 1.6–1.8 | 40 | 40 |
| KNNY250 | 10.0 | 1.6–1.8 | 45 | 40 |
| KNNY300 | 12.0 | 1.6–1.8 | 50 | 30 |
| KNNY350 | 15.0 | 1.6–1.8 | 50 | 30 |
Compressibility for all grades: 12 ± 7 %. Pliability for all grades: no crack. All grades are made from non-asbestos heat-resistant fibre, packing material and natural rubber compound.
| Length (mm) | Width (mm) | Thickness (mm) |
|---|---|---|
| 4100 | 1500 | 0.5 – 6.0 |
| 2000 | 1500 | 0.5 – 6.0 |
| 1500 | 1360 | 0.5 – 6.0 |
| 3810 | 1270 | 0.5 – 6.0 |
| 1270 | 1270 | 0.5 – 6.0 |
| 1500 | 1500 | 0.5 – 6.0 |
Other sizes are available on request or cut to customer requirements. Packing: wooden pallet of approximately 1000 kg or 2000 kg net each.
Ningbo Kaxite Sealing Materials Co., Ltd. operates its own compounding, calendering and vulcanising facility in Ningbo, China. We control fibre grade, packing material ratio, rubber compound and curing cycle — so the sheet you receive is consistent from batch to batch and matches the published technical specification.
| Information | Example | Why We Need It |
|---|---|---|
| Grade | KNNY300 | Confirms fibre and rubber compound |
| Thickness | 3.0 mm | Calender setup and price |
| Sheet size | 1500 × 1500 mm | Cutting layout and packing |
| Quantity | 100 sheets | Sets production scheduling and pricing tier |
| Application | Steam pipeline flange, oil-bearing media | Confirms grade and surface finish |
| Media and temperature | Water, steam, aviation oil, 150 °C | Confirms material compatibility |
| Die-cut drawing (if applicable) | PDF or DXF | Confirms tooling and finished part price |
Send your required grade, thickness, sheet size and quantity. Our technical sales team will reply within 2 business hours with a factory price and available stock sizes.
Address
No. 432 Zhenhai Middle Road, Luotuo Street, Zhenhai District, Ningbo City, Zhejiang China
Share your sealing requirement and our technical sales team will respond within 24 business hours. For fastest service, include your flange specification, operating pressure, temperature, and process media in the message below.
