Products
Molded PTFE Sheet Gaskets

Molded PTFE Sheet Gaskets

Model:KXT PMS
We are prominent manufacturer and supplier of quality Molded PTFE Sheet Gaskets, we maintain quality standard in manufacturing these sheet. The PTFE Sheets available with us are available in all types of virgin and all filled grades. These sheets are available in two types that are ptfe sheet and ptfe skived sheets.
Molded PTFE · Model KXT PMS

Molded PTFE Sheet Gaskets KXT PMS — Virgin & Filled Grades for Chemical, Electrical and Food Sealing

Molded PTFE Sheet Gaskets KXT PMS are compression-molded PTFE sheet gaskets produced from virgin PTFE resin or filled PTFE compounds. Unlike skived PTFE sheet (which is peeled from a molded billet), molded PTFE sheet is formed to final thickness directly under heat and pressure — delivering more uniform density, lower internal stress, and better dimensional stability for critical sealing applications.

KXT PMS is available in all virgin and filled grades — including glass fiber, carbon, graphite, bronze, and MoS₂ — and in two product forms: molded PTFE sheet and skived PTFE sheet. Standard thickness from 1.5 mm to 50 mm, tensile strength 2,500–4,000 PSI, and continuous service from -200°C to +250°C.

Request a quote →

Molded PTFE Sheet Gaskets KXT PMS
-200 ~ +250°C Temp. Range
1.5 – 50 mm Thickness
2,500–4,000 PSI Tensile Strength
2.13 – 2.24 Specific Gravity
Virgin + Filled All Grades

What is the difference between Molded PTFE Sheet and Skived PTFE Sheet?

Direct answer: Molded PTFE Sheet is formed to final thickness directly in a mold under heat and pressure, producing uniform density and low internal stress. Skived PTFE Sheet is peeled (skived) from a large molded PTFE billet using a precision blade — offering thinner gauges and larger sheet sizes at lower cost, but with slightly less dimensional stability than directly molded sheet.

Lowest Friction of Solid Materials

Molded PTFE Sheet has the lowest coefficient of friction of any solid material — ideal for sliding and non-stick applications.

Wide Temperature Range

PTFE Sheet withstands continuous service from -200°C up to +250°C — suitable for cryogenic and elevated-temperature sealing.

Astonishing Chemical Resistance

PTFE Sheet is virtually inert to all industrial chemicals except molten alkali metals and elemental fluorine — pH 0-14 service.

Best Electrical Properties

PTFE has the best electrical insulating properties of all plastics — widely used in electronics and heavy electrical insulation.

Virgin & Filled Grades

Available in all virgin grades and filled grades — glass fiber, carbon, graphite, bronze, MoS₂ — for customized mechanical performance.

Thickness to 50 mm

Molded PTFE Sheet is available from 1.5 mm to 50 mm in one continuous molded section — thicker than typical skived sheet.

What are the technical specifications of Molded PTFE Sheet Gaskets KXT PMS?

Direct answer: KXT PMS Molded PTFE Sheet Gaskets are supplied in standard thickness 1.5 mm to 50 mm, virgin grade, with continuous service temperature from -200°C to +250°C, tensile strength 2,500–4,000 PSI, and specific gravity 2.13–2.24. All filled grades (glass fiber, carbon, graphite, bronze, MoS₂) are available on request.
Property Value
Model KXT PMS
Standard Thickness 1.5 – 50 mm
Grade Virgin (all filled grades available on request)
Temperature Range -200°C to +250°C
Tensile Strength 2,500 – 4,000 PSI
Specific Gravity 2.13 – 2.24
Product Forms Molded PTFE sheet, skived PTFE sheet
Filled Grades Available Glass fiber, carbon, graphite, bronze, MoS₂
Chemical Resistance Excellent (pH 0-14, except molten alkali metals and fluorine)
Electrical Properties Best of all plastics — excellent insulator

Data per Kaxite datasheet. Custom sizes, thicknesses, and cut gaskets available on request. Individually packaged for clean handling.

Molded PTFE Sheet Gaskets — material surface Molded PTFE Sheet Gaskets — sheet close-up
Molded PTFE Sheet Gaskets KXT PMS — compression-molded virgin and filled PTFE sheet, standard thickness 1.5 to 50 mm, available in both molded and skived sheet forms.

Where are Molded PTFE Sheet Gaskets used?

Direct answer: Molded PTFE Sheet Gaskets are used in a wide variety of industries — electronics (circuit boards), heavy electricals, valves, pumps, chemical processing, food and pharmaceutical equipment — wherever excellent chemical resistance, low friction, and high electrical insulation are required.
Electronics

Used in circuit board manufacturing and electronic component insulation where PTFE's dielectric strength and chemical inertness are essential.

Heavy Electricals

Used as high-voltage insulating gaskets and liners — PTFE has the best electrical properties of all plastics.

Valves

Cut into valve seat gaskets, body seals, and stem packing rings for chemical and petrochemical service.

Pumps

Used as pump casing gaskets, flange seals, and wear rings across acid, alkali, and solvent media.

Chemical Processing

For reactor vessels, heat exchangers, and process equipment handling aggressive chemicals across pH 0-14.

Food & Pharmaceutical

Used for food-contact and pharmaceutical-grade gaskets where non-toxicity and cleanability are critical.

Frequently asked questions about Molded PTFE Sheet Gaskets

Q1What is a Molded PTFE Sheet Gasket?

A Molded PTFE Sheet Gasket is a compression-molded PTFE sheet cut into gasket shapes. Unlike skived PTFE sheet, which is peeled from a molded billet, molded PTFE sheet is formed to final thickness directly in a mold — giving more uniform density and lower internal stress.

Q2What is the difference between molded PTFE sheet and skived PTFE sheet?

Molded PTFE sheet is formed to final thickness in a mold — uniform density, low stress, better dimensional stability. Skived PTFE sheet is peeled from a large molded PTFE billet — thinner gauges, larger sheet sizes, and lower cost, but slightly less dimensional stability than molded sheet.

Q3What thickness range is available for KXT PMS Molded PTFE Sheet?

Standard thickness range is 1.5 mm to 50 mm. Custom thicknesses and cut gaskets are available on request.

Q4What temperature range can Molded PTFE Sheet Gaskets handle?

Continuous service temperature range is -200°C to +250°C. PTFE remains flexible at cryogenic temperatures and does not embrittle or melt within the operating range.

Q5What filled grades of PTFE are available?

KXT PMS is available in virgin grade and all common filled grades — glass fiber, carbon, graphite, bronze, and MoS₂. Each filled grade changes specific mechanical properties such as compressive strength, thermal conductivity, or wear resistance.

Q6What chemicals can Molded PTFE Sheet Gaskets seal?

Molded PTFE Sheet Gaskets are virtually inert to all industrial chemicals across pH 0-14 — including strong acids, bases, solvents, and oxidizing agents. Only molten alkali metals and elemental fluorine attack PTFE.

Q7What industries use Molded PTFE Sheet Gaskets?

Molded PTFE Sheet Gaskets are widely used in electronics (circuit boards), heavy electricals, valves, pumps, chemical processing, and food and pharmaceutical industries.

Q8What is the MOQ and lead time?

MOQ depends on sheet size, thickness, and quantity — small trial orders are possible for standard sizes. Sample lead time is typically 5-7 days. Production lead time for standard and custom orders is typically 15-25 days after order confirmation.

Q9Can Kaxite manufacture custom cut PTFE gaskets?

Yes. Kaxite manufactures custom PTFE gaskets to customer drawings — including cut gaskets, die-cut shapes, and custom sheet sizes. Provide outer diameter, inner diameter, thickness, and quantity for a custom quotation.

Q10Does Molded PTFE Sheet have a shelf life?

No. PTFE does not age or degrade during storage. Molded PTFE Sheet has unlimited shelf life when stored in its original packaging away from direct sunlight and contamination sources.

Why choose Kaxite for Molded PTFE Sheet Gaskets?

10+ Years of Experience Ningbo Kaxite Sealing Materials Co., Ltd. has more than a decade of sealing materials production experience.
Virgin & Filled Grades Available in all virgin and filled grades — glass fiber, carbon, graphite, bronze, MoS₂ — for customized performance.
Thickness to 50 mm Molded PTFE Sheet is available in one continuous molded section from 1.5 mm to 50 mm thickness.
Custom Cut Available Sheets can be supplied in standard size or cut to customer-specific dimensions and shapes — including die-cut gaskets.

Request a quote for Molded PTFE Sheet Gaskets KXT PMS

Send us your required sheet size, thickness, grade (virgin or filled), quantity, and application details — including media, operating temperature, and pressure. Kaxite's technical team will respond within 2 business hours with pricing and lead time. For custom cut gaskets, include a drawing with outer diameter, inner diameter, thickness, and quantity.

Last reviewed: September 2026 · Kaxite Sealing Technical Team

Send Inquiry
Contact Info

Request a Quote or Technical Consultation

Share your sealing requirement and our technical sales team will respond within 24 business hours. For fastest service, include your flange specification, operating pressure, temperature, and process media in the message below.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept