Products
Basalt Fiber Rope

Basalt Fiber Rope

Model:KXT
B103T is a braided rope made from basalt fiber — a mineral fiber with anti-aging, high-temperature, acid & alkali, flame-retardant, insulating, and low-moisture-absorption properties, and strong bonding to concrete and resin. In many applications it replaces carbon fiber or aramid fiber with better cost structure and wider availability. Typical service includes boiler, coke oven, industrial oven, and wood / pellet stove door seals, plus crucible packing, pollution-control equipment, and pump shaft packing. Send your operating temperature, media, and joint size for a same-week factory quote.

Basalt Fiber Rope for Boiler, Coke Oven and Industrial Furnace Door Seals

B103T is a **braided rope made from basalt mineral fiber** — a material with the mechanical and chemical profile that high-temperature door seals, packing rings, and crucible work demand: **anti-aging, high-temperature, acid & alkali resistant, flame retardant, insulating, low moisture absorption**, and **strong bonding to concrete and resin**. In selected applications it can replace **carbon fiber or aramid fiber** at a better cost structure. For the fibre family, see Basalt Fiber; for the equivalent forms, see Basalt Fiber Yarn and Basalt Fiber Tape.

B103T basalt fiber braided rope for boiler and coke oven door seals
Product at a Glance

B103T Basalt Fiber Braided Rope

Braided mineral fiber rope. Used for door seals and gaskets on boilers, coke ovens, industrial ovens, wood stoves and pellet stoves — plus crucible packing, pollution control equipment, and pump shaft packing.

B103T Braided Mineral fiber High-temperature Acid & alkali

Seven Properties That Define the Material

1
Anti-aging
2
High-temperature resistant
3
Acid & alkali resistant
4
Strong bonding to concrete & resin
5
Flame retardant
6
Good electrical insulation
7
Low moisture absorption
8
Replaces carbon / aramid in selected use

Basalt vs Carbon Fiber vs Aramid Fiber — Substitution Guidance

Alternative

Carbon Fiber

  • Highest specific stiffness
  • Electrically conductive
  • Brittle under bend and shear
  • Higher material cost
Alternative

Aramid Fiber (Kevlar)

  • Very high tensile strength
  • Poor UV resistance
  • Moisture pickup under load
  • Limited high-temperature ceiling
This Product

Basalt Fiber Rope B103T

  • High-temperature + flame retardant
  • Acid, alkali, and moisture resistant
  • Electrically insulating
  • Bonds strongly to concrete and resin
  • Cost-effective substitute in selected applications

Substitution suitability depends on the specific operating temperature, chemical media, and mechanical loads of your application. Send us the specification sheet and we will confirm whether basalt fiber rope meets the requirement.

Where Basalt Fiber Rope Is Specified

S1
Boiler & Coke Oven Door Seals Braided rope seals on firebox doors, inspection ports, and cleaning doors where the seal must survive repeated thermal cycling and combustion by-products.
S2
Industrial Oven Doors & Stove Doors Door gaskets on industrial ovens, wood stoves, and pellet stoves. The rope holds its shape under repeated compression so the door reseals every cycle.
S3
Crucible Packing Packing rope around crucible rims and furnace lips where the material must stay inert to molten-metal splash and thermal shock.
S4
Pollution Control Equipment Sealing and packing in scrubber, baghouse, and duct expansion joints where acid/alkali resistance and flame retardancy matter together.
S5
Pump Shaft Packing Braided shaft packing for pumps handling hot, mildly aggressive media where the packing must resist compression set over time.
S6
Furnace & High-Temperature Flange Seals Static sealing on furnace flanges and high-temperature ducting where organic fiber seals would degrade. For pure insulation at extreme temperature, see Ceramic Fiber; for sleeving protection see Basalt Fiber Sleeving.

Application Reference Image

Basalt fiber rope application — braided rope in industrial sealing service

Selection and Ordering Notes

What to send for an accurate quote and diameter recommendation
  • Operating temperature and process media (if any) at the seal.
  • Door or joint geometry — width and depth of the packing groove or rope channel.
  • Required length per seal and number of seals per order.
  • Whether you are substituting an existing carbon fiber or aramid fiber rope — include the existing specification for our substitution review.
  • Any additional requirement such as graphite impregnation, PTFE dispersion, or silicone treatment, if these are relevant to your specification.

Procurement FAQ

What is basalt fiber rope used for?

As a braided seal or gasket on boiler doors, coke oven doors, industrial oven doors, wood stoves, and pellet stoves — and for crucible packing, pollution-control equipment, and pump shaft packing. See Basalt Fiber for the wider fibre family.

Can it replace carbon fiber or aramid fiber?

In selected applications, yes. Basalt fiber rope combines high-temperature resistance, chemical inertness, flame retardancy, and electrical insulation at a favourable cost structure. Whether it is the right substitute for a specific application depends on the operating temperature, chemical environment, and mechanical loads. Send us your specification sheet and we will confirm.

What makes it suitable for boiler and coke oven door seals?

Anti-aging, high-temperature resistance, acid and alkali resistance, flame retardancy, and low moisture absorption — combined with the braided rope construction which holds its shape under repeated door-opening compression. The basalt fiber is inert to the combustion by-products that attack organic fibre seals.

How is it different from ceramic fiber rope?

Both are high-temperature mineral fiber ropes. Basalt fiber typically offers better mechanical strength and acid/alkali resistance with low moisture absorption; ceramic fiber typically offers better thermal insulation at extreme temperatures. For door seals where both thermal and mechanical performance matter, basalt fiber is often preferred — see Ceramic Fiber for insulation-focused applications.

What is the minimum order quantity and lead time?

Stock diameters are available from 1 meter for trial quantities; production quantities are quoted by spool length or project volume. Typical lead time for stock items is 7–12 working days from order confirmation; custom braided sizes and treated ropes are quoted with a project-specific lead time. For related forms, see Basalt Fiber Yarn, Basalt Fiber Tape, and the wider Insulation Products range.

Need a basalt fiber rope quote or a diameter recommendation? Send your operating temperature, media, groove size, and required length — our technical sales team responds within 2 business hours with a diameter recommendation, pricing, and lead time.
Request Factory Quote
Send Inquiry
Contact Info

Request a Quote or Technical Consultation

Share your sealing requirement and our technical sales team will respond within 24 business hours. For fastest service, include your flange specification, operating pressure, temperature, and process media in the message below.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept