PTFE Products

Molded PTFE Tube made from 100% virgin PTFE, compression molded and sintered. Service temperature −180 °C to +260 °C. OD 6–300 mm, wall thickness 1–30 mm, can be machined into non-standard parts or used as a non-stick liner. Lowest friction coefficient and excellent chemical resistance among known plastics. Material certificate and dimensional report supplied. Factory-direct price, 7–15 day lead time.

Molded PTFE Tube OD: 30mm to 600mm Length: 10mm to 300mm/pc we have virgin molded ptfe tube, filled molded ptfe tube, fiber glass molded ptfe tube, graphite filled molded ptfe tube, bronze filled molded ptfe tube.

40% Bronze filled PTFE Round Bar is the most common metal filler and it is dark brown in color. Bronze filler has excellent wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. Adding bronze in percentages between 40 and 60% can increase wear. PTFE Bronze-filled has poor chemical resistance in the presence of acids and alkali. PTFE Bronze-Filled is machined and used in bearings at high speeds when shafts are not hardened. It is useful in applications with higher mechanical loads and higher speeds rubbing contact points where bronze-filled supplies the strength and conductivity to carry away excess and unwanted heat. Used in hydraulic systems, superb for linear bearing, slides, guide ways, bearing rings, piston rings and wear pads., etc

25% Bronze Powder Filled PTFE Rod Bar is the most common metal filler, it is dark brown in color. Bronze filler has excellent wears, creep resistance, and higher thermal conductivity than glass fiber with PTFE

60% Bronze filled PTFE Rod is the most common metal filler and it is dark brown in color. Bronze filler has excellent wear, creep resistance, and higher thermal conductivity that glass fiber with PTFE

40% Bronze filled PTFE Rod is the most common metal filler and it is dark brown in color. Bronze filler has excellent wear, creep resistance, and higher thermal conductivity that glass fiber with PTFE