Products
Black Injectable Sealant Packing for Pump and Valve

Black Injectable Sealant Packing for Pump and Valve

Model:KXT IJ900
Kaxite KXT IJ900 black injectable sealant packing is a carefully controlled blend of high-tech greases, lubricant and modern fibers. Unlike braided packing, no cutting is necessary — it conforms to any stuffing box size and seals it, filling crevices on worn or grooved shaft sleeves. Three colour-coded variants: black IJ900B (8 bar, 8 m/s, −8 to +180 °C, pH 4–13), white IJ900W (10 bar, 10 m/s, −18 to +200 °C, pH 2–13), yellow IJ900Y (12 bar, 15 m/s, −20 to +230 °C, pH 1–14). For water and waste water, building services, pulp and paper, chemical, mining, sugar industries; centrifugal and piston pumps, agitators, refiners and mixers. Bulk supply, OEM branding. Free sample for qualified buyers, factory-direct price, quote within 24 hours.
KXT IJ900 black injectable sealant packing in gun cartridge for pump and valve gland sealing
KXT IJ900
Model KXT IJ900 · Injectable Gland Sealant

Black Injectable Sealant Packing KXT IJ900 — Graphite Gland Sealant for Pump & Valve, No Cutting Needed, Bulk Supplier

Kaxite KXT IJ900 black injectable sealant packing is a carefully controlled blend of high-tech greases and lubricant combined with modern fibers, delivered in a gun cartridge. Unlike braided packing, no cutting is necessary — it conforms to any stuffing box size and seals it, filling every crevice on worn or grooved shaft sleeves. Three colour-coded variants cover different pressure, temperature and chemical envelopes: black IJ900B, white IJ900W and yellow IJ900Y. For water and waste water technology, building services, pulp and paper, chemical, mining and sugar industries; centrifugal pumps, piston pumps, agitators, refiners and mixers. Bulk supply, OEM branding. Free sample for qualified buyers, factory-direct price, quote within 24 hours.

No Cutting. No Fitting. Just Inject.

Braided packing has to be cut to length and matched to the stuffing box cross-section — that takes time and skill, and mistakes cause leaks. Injectable sealant removes the whole step. Load the gun cartridge, screw the nozzle into the injection port, and pump. The compound flows into every gap, takes the shape of the stuffing box and the shaft, and cures into a leak-free gland. Worn shafts do not have to be replaced or reworked — the compound simply fills the grooves.

Three Colour-Coded Variants — Pick by Service Envelope

Variant Selector
Black · IJ900B

Standard Black Sealant

Temperature
−8 to +180 °C
Pressure
8 bar
Shaft speed
8 m/s
pH range
4 – 13
Colour
Black
White · IJ900W

White Sealant

Temperature
−18 to +200 °C
Pressure
10 bar
Shaft speed
10 m/s
pH range
2 – 13
Colour
White
Yellow · IJ900Y

Yellow Sealant

Temperature
−20 to +230 °C
Pressure
12 bar
Shaft speed
15 m/s
pH range
1 – 14
Colour
Yellow

Full Technical Data — KXT IJ900 Series

Data Sheet
Table 1 — KXT IJ900 series colour-coded injectable sealant packing specification
Parameter IJ900B (Black) IJ900W (White) IJ900Y (Yellow)
Colour Black White Yellow
Temperature −8 to +180 °C −18 to +200 °C −20 to +230 °C
Pressure 8 bar 10 bar 12 bar
Shaft speed 8 m/s 10 m/s 15 m/s
pH range 4 – 13 2 – 13 1 – 14
Base composition Graphite injectable compound with paraffin oil-based lubricant and modern fibers
Delivery format Gun cartridge (injectable sealant)
Installation method Inject through port — no cutting, no fitting to stuffing box cross-section
Customization OEM branding, gun cartridge size on request
Quotation basis Variant (B/W/Y), quantity, cartridge size, destination port

Six Advantages That Lower Total Cost of Ownership

Performance Highlights
ADV. 01

Outstanding Adaptability

Works even in asymmetrical stuffing box spaces. The injectable compound fills every void and takes the shape of the stuffing box — braided packing cannot do this.

ADV. 02

Worn Shafts Do Not Need Replacing

The compound fills crevices on worn or grooved shaft sleeves. No machining, no replacement shaft — the sealant simply conforms to the current surface.

ADV. 03

Reduced Frictional Forces

The paraffin oil-based lubricant gives excellent sliding abilities. Equipment runs cooler, consumes less energy and lasts longer.

ADV. 04

Shutdown Time Reduction

Injection takes minutes, not hours. No packing rings to cut, no precise fitting. Restart the pump and verify leak-free operation immediately.

ADV. 05

No Cooling or Flush Water

No flush water is needed. The cost of wasted water and the cost of the flushed product are both eliminated from the operating budget.

ADV. 06

Leak-Free Performance

Runs leak-free. Reduced leakage reduces product loss, reduces cleanup and improves plant safety and environmental compliance.

For conventional braided gland packing options, compare with Graphite Packing or Graphite PTFE Packing. For pre-formed graphite rings used with injection, see Die-Formed Graphite Rings. For other injectable sealant variants, compare with Injectable Sealant Packing for Pump and Valve and White Injectable Sealant Packing for Pump. For the full range, browse the Injectable Sealants category.

Recommended Applications

Where KXT IJ900 Is Used

Water & Waste Water

Municipal water and waste water treatment plants — pumps with worn or grooved shaft sleeves.

Pulp & Paper

Stock pumps, refiners and mixers where quick gland maintenance reduces downtime.

Chemical & Process

Centrifugal pumps and process industry equipment handling a wide range of media.

Mining & Sugar

Slurry pumps in mining and sugar industry equipment where abrasive media wear the shaft.

Centrifugal Pumps

Standard centrifugal pump glands where braided packing has been leaking or requiring frequent re-tightening.

Piston Pumps

Reciprocating and piston pumps where the injectable compound conforms to the moving shaft.

Agitators & Mixers

Vessel agitators and industrial mixers where gland access is difficult.

Refiners

Pulp refiners and similar heavy-duty rotating equipment where gland integrity matters.

Commercial Terms and What to Send for a Quotation

Buyer Checklist
Table 2 — Commercial terms
Item Value
MOQ Contact Kaxite — small trial orders accepted
Lead time Contact Kaxite — standard variants ship from stock
Payment T/T · L/C at sight · Trade Assurance
Shipping FOB Ningbo · CIF · Express for samples
Warranty Batch traceability and material certificate with every order
Support Technical consultation on variant selection, injection procedure and gun requirements
What to send Variant (B / W / Y), cartridge size, quantity, medium, pressure, temperature, shaft speed, destination port

Frequently Asked Questions

Buyer Q&A
What is KXT IJ900 injectable sealant packing used for?

KXT IJ900 is an injectable gland sealant for pump and valve stuffing boxes. It is pumped into the stuffing box through an injection port, where it conforms to the box and shaft and cures into a leak-free gland. It is used on centrifugal pumps, piston pumps, agitators, mixers, refiners and similar rotating equipment in water and waste water, pulp and paper, chemical, mining and sugar industries. It is especially useful where the shaft sleeve is worn or grooved, or where a braided packing would be difficult to fit.

What is the difference between IJ900B, IJ900W and IJ900Y?

The three variants are distinguished by colour and by their operating envelope. IJ900B (black) covers 8 bar, 8 m/s, −8 to +180 °C and pH 4–13. IJ900W (white) covers 10 bar, 10 m/s, −18 to +200 °C and pH 2–13. IJ900Y (yellow) covers 12 bar, 15 m/s, −20 to +230 °C and pH 1–14. Choose the variant that covers your pressure, temperature, shaft speed and pH conditions with margin. Send your operating conditions and Kaxite will recommend the suitable variant.

Do I need to cut the packing to size?

No. That is the main advantage of injectable sealant packing over braided packing. The compound is delivered in a gun cartridge and pumped into the stuffing box through the injection port. It conforms to any stuffing box size and fills every crevice. No cutting, no fitting, no precise measurement — just inject and verify leak-free operation.

Does the shaft have to be replaced if it is worn?

No. Injectable sealant packing fills crevices on worn or grooved shaft sleeves. The compound takes the shape of the current shaft surface and seals it. That eliminates the cost and downtime of replacing or re-machining the shaft.

Do I need flush water?

No. KXT IJ900 requires no cooling or flush water. That eliminates the operating cost of wasted water and the cost of the flushed product. The low friction coefficient means the equipment runs cooler and consumes less energy.

How long does the injection take?

Injection typically takes minutes rather than the hours required for a full braided packing replacement. Shutdown time is dramatically reduced because there is no need to cut, fit or measure packing rings. Restart the equipment and confirm leak-free operation immediately.

Do you provide technical support for variant selection?

Yes. Send your operating pressure, temperature, shaft speed and pH range and Kaxite will recommend the correct variant — IJ900B, IJ900W or IJ900Y. Technical consultation on injection procedure and gun requirements is included. For on-site support, contact Kaxite separately to arrange it.

How do I request a quotation?

Send your required variant (B / W / Y), cartridge size, quantity, medium, pressure, temperature, shaft speed and destination port. Kaxite replies within 24 hours with a factory-direct quotation, lead time and packing details.

Need a factory price for KXT IJ900 injectable sealant packing? Send your variant (B / W / Y), operating conditions and quantity — Kaxite replies within 24 hours with a factory-direct quotation and free sample offer for qualified buyers.

Get Factory Price Now
Send Inquiry
Contact Info

Request a Quote or Technical Consultation

Share your sealing requirement and our technical sales team will respond within 24 business hours. For fastest service, include your flange specification, operating pressure, temperature, and process media in the message below.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept