Double Jacketed Gasket Machine
Model:KXT E1410
KXT E1410 is a dedicated production machine for double jacketed gaskets used in heat exchangers, shell-and-tube units, and air-cooled coolers. It produces gaskets of 1.5–8 mm thickness, ≤80 mm width, and gasket outside diameter 150–4000 mm — covering the full heat exchanger flange range in one machine frame. The standard package includes 8 different width moulds; other widths are made to order. Send your gasket thickness, width, and diameter range for a factory quote within 24 business hours.
Double Jacketed Gasket Machine for Heat Exchanger Flanges up to 4000 mm OD
KXT E1410 is built for one job: forming the soft filler core and wrapping it with a thin metal jacket to produce **double jacketed gaskets** for shell-and-tube heat exchangers, air-cooled coolers, and other heat transfer equipment. It covers **gasket OD 150–4000 mm, thickness 1.5–8 mm, width ≤80 mm** — the full heat exchanger flange range in a single machine frame — and ships with **8 width moulds as standard**. For other gasket types and related production lines, see Double Jacketed Gaskets and Machines for Spiral Wound Gaskets.
Gasket OD Range
150 – 4000 mm
One machine frame covers DN150 to DN4000 heat exchanger gasket sizes.
Thickness Range
1.5 – 8 mm
Covers standard double jacketed gasket thicknesses for heat exchanger service.
Width Moulds Included
8 widths
Standard package includes 8 different moulds; other widths made to order.
Standard Machine vs Custom Configuration
Standard Package
KXT E1410 Base Unit
- Gasket thickness 1.5–8 mm range covered by the standard spindle set
- 8 width moulds included in the package
- Gasket OD 150–4000 mm on the standard frame
- 380 V or 220 V three-phase power as requested
- 2.2G frequency converter with 0–150 mm/s linear speed control
- Operation and maintenance manual supplied
Made-to-Order Options
Custom Build Configuration
- Additional width moulds beyond the 8 standard widths
- Custom spindle set for gasket thickness beyond 8 mm
- Non-standard power supply voltage / frequency per destination
- OEM branding on machine frame and control cabinet
- Extra tooling kit for high-volume production lines
- Spare mould sets and wear parts pre-stocked
Full Technical Specification — KXT E1410
| Parameter | Specification |
|---|---|
| Style / Model | KXT E1410 Double Jacketed Gasket Machine |
| Gasket thickness range | 1.5 – 8 mm |
| Gasket width range | ≤ 80 mm (standard package includes 8 different width moulds; other widths made to order) |
| Maximum gasket outside diameter | 4000 mm |
| Minimum gasket inside diameter | 150 mm |
| Total power | 4 kW |
| Spindle motor power | 1.5 kW |
| Power supply | 380 V / 220 V as requested, 3-phase |
| Linear speed | 0 – 150 mm/s |
| Frequency converter | 2.2G |
| Machine dimensions | 900 × 500 × 1200 mm |
| Machine net weight | 200 kg |
Eight Width Moulds Included — One Machine Frame
M1width 1
M2width 2
M3width 3
M4width 4
M5width 5
M6width 6
M7width 7
M8width 8
The 8 mould set covers common heat exchanger jacket widths used in Double Jacketed Gaskets production. Additional widths and non-standard moulds are quoted separately.
Where the KXT E1410 Sits in a Gasket Production Line
STEP 1
Ring Cutting
Cut the metal jacket ring from sheet using a Gasket Cutting Machine.
STEP 2
Jacket Forming
KXT E1410 forms the metal jacket around the soft filler core into the finished double jacketed gasket.
STEP 3
Diameter Sizing
Trim the formed gasket to the final ID and OD on the same machine using the standard OD/ID tooling.
STEP 4
Inspection
Check flatness, jacket-to-core bonding, and dimension with a Gasket Testing Machine.
Typical Applications of Double Jacketed Gaskets
Shell-and-Tube Heat ExchangersStandard metal-jacketed gaskets for exchanger shell flanges, channel covers, and tube-sheet joints — see Double Jacketed Gaskets.
Air-Cooled Heat ExchangersHeader and plug gaskets requiring a metal jacket for rigidity and a soft filler for resilience.
Steam & High-Temperature ServiceJacket material options matched to steam, hot oil, and process gas service where PTFE and rubber gaskets are not suitable.
Pilot to Full Production RunsSingle machine frame produces one-off replacements and small batches on the same tooling — flexible for spare-parts supply and OEM production.
Procurement FAQ
What gasket sizes can the KXT E1410 produce?
The KXT E1410 produces double jacketed gaskets with thickness from 1.5 mm to 8 mm, width up to 80 mm, and gasket outside diameter from 150 mm to 4000 mm. The standard machine package includes 8 width moulds covering common heat exchanger jacket widths; other widths are made to order. See the finished gasket family in Double Jacketed Gaskets.
What is a double jacketed gasket machine used for?
It forms the soft filler core and wraps it with a thin metal jacket to produce double jacketed gaskets. These are used in shell-and-tube heat exchangers, air-cooled coolers, and other heat transfer equipment where a metal-to-metal seal with a resilient core is required.
What power supply does the machine require?
380 V or 220 V three-phase, as requested at order. Total connected power is 4 kW (spindle motor 1.5 kW). A 2.2G frequency converter adjusts spindle speed across the 0–150 mm/s linear range.
What are the dimensions and weight for shipping?
The machine measures 900 × 500 × 1200 mm with a net weight of approximately 200 kg. Crating and sea freight are quoted separately; submit your destination port when requesting a quote.
Is operator training or installation support included?
A PDF operation and maintenance manual covers mould changing, spindle speed setting, and routine maintenance. Remote video support during commissioning is available on request. On-site installation is quoted separately based on destination. For related equipment in the same line, see Machines for Cutting Gaskets and Machines for Kammprofile Gaskets.
Need a double jacketed gasket machine quote or a custom mould set? Tell us your gasket thickness, width range, maximum OD, and destination port — our technical sales team responds within 2 business hours with the recommended configuration, mould set, and shipping estimate.
Request Factory Quote
Send Inquiry
Contact Info
-
Address
No. 432 Zhenhai Middle Road, Luotuo Street, Zhenhai District, Ningbo City, Zhejiang China
-
-
Email
Request a Quote or Technical Consultation
Share your sealing requirement and our technical sales team will respond within 24 business hours. For fastest service, include your flange specification, operating pressure, temperature, and process media in the message below.
News Recommendations
