Double Jacketed Gasket

Model KXT 900 · Metal Jacketed Gasket Family

Double Jacketed Gasket for Heat Exchangers, Boilers & Narrow Flanges — SS316 / SS304 / Copper / Monel Jacket, Factory Price

Kaxite KXT 900 is a double jacketed gasket built from a soft pliable filler core fully enclosed in a two-piece metal jacket. The jacket protects the filler from the process medium on both faces, so the gasket holds up in high-temperature, high-pressure and corrosive service where an exposed graphite or PTFE gasket would extrude or degrade. Choose SS304, SS316, SS321, SS410, soft iron, carbon steel, brass, copper or monel for the jacket, and non-asbestos, graphite or PTFE for the filler. Standard sizes to ASME B16.20, DIN, JIS and EN, or made to your drawing. Factory-direct price, custom jacket and filler combinations, quote within 24 hours.

Request Factory Quotation View Full Specification

KXT 900

Four Jacket Styles — Pick the One Your Flange Needs

All four share the same jacket-and-filler principle, but each style is optimised for a different flange type and pressure/temperature envelope.

KXT 900

Double Jacketed Gasket

Filler fully enclosed in a two-piece metal jacket. Standard choice for high temperature and pressure, and where corrosion on the filler is a risk.

Best for: heat exchangers · boilers · pressure vessels

KXT 910

Single Jacketed Gasket

Filler partially enclosed by a metal jacket. Used on small-diameter openings with narrow flanges where only light bolting can be applied.

Best for: small nozzles · narrow flanges

KXT 920

Corrugated Jacket Gasket

Soft filler enclosed by a corrugated metal shell and washer. Designed for the high pressures and temperatures common in oil refinery service.

Best for: oil industry · refinery flanges

KXT 940

Single Jacket Overlap Gasket

Filler fully enclosed in a one-piece metal jacket with an overlap joint. Gives the filler the same protection as a double jacket but with a simpler construction.

Best for: general industrial flanges

Full Specification — KXT 900 Series

All styles below are covered by the same quotation. Send your flange standard, medium and operating conditions and Kaxite will confirm the right jacket and filler pairing.

Material Selection — Jacket and Filler Pairings

The jacket and filler work as a pair. Choose the jacket for corrosion and temperature resistance, and the filler for the sealing behaviour your medium needs.

Where Metal Jacketed Gaskets Are Used

Five industries where the fully enclosed filler gives an advantage over an exposed gasket material.

For higher pressure flange joints where a Kammprofile or spiral wound gasket is required, compare with our spiral wound gaskets. For lower pressure flanges where a soft cut gasket is enough, look at expanded graphite gaskets or PTFE gaskets. For corrugated metal jackets with a graphite or non-asbestos filler, see the corrugated gaskets range. If you are specifying a gasket for a heat exchanger or boiler and want to compare several gasket types side by side, browse the full gaskets catalogue. To purchase this specific double jacketed gasket as a category, browse Double Jacketed Gaskets.