Products
PFA Flexible Tubing

PFA Flexible Tubing

Model:KXT PFA1125
KXT PFA1125 is a high-purity perfluoroalkoxy (PFA) flexible tubing engineered for fluid transfer where extractables must stay below detection limits. It maintains mechanical integrity from −200 °C to +260 °C, delivers 10× the flex life of FEP under repeated bending, and is extruded in a dust-free workshop suitable for semiconductor, pharmaceutical, and ultra-pure chemical routing. Available in standard metric and inch sizes with customized coil lengths. Send your operating pressure, media, and flange connection for a same-week factory quote.
Rating: 5.0
(Rating Count: 1)

High-Purity PFA Flexible Tubing for Semiconductor, Pharmaceutical & Ultra-Pure Chemical Transfer

KXT PFA1125 is specified when FEP tubing reaches its thermal or flex-life limits, and when PTFE tubing is too rigid for routing. Extruded from virgin PFA resin in a dust-free workshop, this tubing delivers −200 °C to +260 °C continuous service, 10× the flex life of FEP, and ultra-low extractables for fluid systems where metal-ion contamination cannot be tolerated. Whether you are sourcing for a fab expansion or validating a pharmaceutical fill line, the technical data and factory-quote path below are structured to shorten your qualification cycle. For material comparison, see the PTFE Tube range and PTFE Products overview.

−200 → +260 °C Continuous Service Cryogenic to high-temperature fluid transfer, with useful properties maintained across the full range.
10× Flex Life vs FEP Repeated bending and vibration do not shorten service life; suitable for routing in tight equipment envelopes.
Dust-Free Workshop Extrusion Ultra-low extractables and particle generation for semiconductor and pharmaceutical cleanroom compatibility.

Technical Data Sheet — KXT PFA1125

Property Value Unit Method / Note
Mechanical Properties
Tensile Strength at 23 °C 28–31 MPa —
Elongation at Break, 23 °C 260–300 % —
Flexural Strength No break — D790
Impact Strength No break — —
Yield Strength at 23 °C 12 MPa —
Density 2.12–2.17 g/cm³ —
Thermal Properties
Coefficient of Linear Expansion, 20–100 °C 12 × 10⁻⁵ K⁻¹ D696
Melting Point 305 °C —
Thermal Conductivity 0.25 W/m·K —
Service Temperature −250 to +250 °C Extended range available to +260 °C
Processing Temperature 370–395 °C —
Electrical Properties
Surface Arc-Resistance >300 (does not track) sec D495
Volume Resistivity (dry, 50% RH) >10¹⁸ ohm·cm D257
Surface Resistivity (100% RH) >10¹⁶ ohm/sq D257
Dielectric Constant (60 Hz–1 MHz) 2.06 ε D150-81
Dielectric Strength 78.8 kV/mm D149
Dissipation Factor (60 Hz–1 MHz) <0.0001 — D150-81
Other Properties
Refractive Index 1.344 nD 25 D524
Water Absorption <0.01 % D570-81
Flame Rating VE-0 — UL-94
Limiting Oxygen Index 95 % O₂ D2863
Resistance to Weathering Excellent — —
Specific Gravity 2.12–2.17 — D792-66 (1979)
Coefficient of Friction 0.05–0.08 — D1894

Data is typical value, not a specification limit. Request a batch-specific certificate of analysis with your order.

Where KXT PFA1125 Is Specified

Semiconductor Wet Processing

High-purity chemical delivery, acid and solvent routing, and CMP slurry lines where metal-ion extractables must remain in the ppt range.

Pharmaceutical & Biotech Fluid Handling

Fill-line transfer, buffer and media routing, and CIP/SIP circuits requiring a non-reactive, low-adsorption wetted path.

Ultra-Pure Water & Analytical Systems

Chromatography, trace analysis, and water-polishing loops where transparency and low extractables support visual verification and data integrity.

Chemical Process & Pilot Plants

Aggressive acid, base, and solvent transfer where FEP service life is insufficient and PTFE rigidity complicates routing.

Procurement FAQ

How do I request a factory quote for PFA Flexible Tubing KXT PFA1125?

Use the Send Inquiry form below and include operating pressure, process media, temperature, and flange or connection type. Our technical sales team responds within 2 business hours with pricing, lead time, and batch-level documentation.

Can Kaxite supply customized coil lengths and dimensional tolerances?

Yes. Standard metric and inch sizes range from 6×4 mm to 12×10 mm; customized coil lengths, cut-to-length pieces, and tolerance windows are available. For related fluoropolymer semi-finished shapes, see PTFE Rods and PTFE Parts.

Does PFA tubing require a minimum order quantity?

MOQ depends on size and customization level. Standard sizes are available from 1 meter for qualification sampling; production quantities are quoted by coil or project volume. Submit your annual or project demand for volume pricing.

Need a PFA tubing sample or a factory quote? Share your operating conditions and we will respond within 2 business hours with size recommendation, pricing, and lead time.

Send Inquiry for Factory Quote
Send Inquiry
Contact Info

Request a Quote or Technical Consultation

Share your sealing requirement and our technical sales team will respond within 24 business hours. For fastest service, include your flange specification, operating pressure, temperature, and process media in the message below.

Rating:
5.0
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept