Products
Spun Kynol Fiber Yarn

Spun Kynol Fiber Yarn

Model:PR117
Kaxite PR117 Spun Kynol Fiber Yarn is a halogen-free, inherently flame-retardant yarn made from 100% Kynol novoloid fibre. It will not melt or drip, forms a protective char under flame, and handles pH 1–13 at 150°C continuous (250°C short-term peak). Available plain or with glass fibre core, and with optional PTFE + silicone oil impregnation for lower friction. Used as the base yarn for fire-safe braided gland packing in chemical, pharmaceutical, marine and power plants. Factory-direct price, free sample, custom yarn count and OEM packing.
Halogen-Free LOI ≥ 32 No Melt · No Drip pH 1–13 Continuous 150 °C
Model PR117 · Spun Kynol Fiber Yarn

Spun Kynol Fiber Yarn for Fire-Safe Braided Packing — Factory Direct, Free Sample, Custom Core & Impregnation

Kaxite PR117 is a spun yarn made from 100% Kynol novoloid (phenolic) fibre — a halogen-free, inherently flame-resistant fibre that will not melt, drip or support combustion. It is the yarn of choice for braided gland packing in fire-risk, chemical and high-purity service where PTFE and aramid yarns fail: Kynol keeps its structural integrity at 150 °C continuous, forms a protective char under flame, and resists pH 1–13 without releasing toxic smoke. Available plain, with a glass fibre core for higher tensile strength, or impregnated with PTFE and silicone oil for lower friction and longer shaft life.

Spun Kynol Fiber Yarn PR117 PR117
Fibre100% Kynol Novoloid
LOI≥ 32 %
Continuous Temp.150 °C
Short-Term Peak250 °C
pH Range1 – 13
Core OptionsGlass Fibre / None

What Is Kynol Fibre — and Why It Beats PTFE and Aramid in Fire-Risk Service

Kynol is a cross-linked novoloid (phenolic) fibre. Unlike PTFE, it does not melt; unlike aramid, it does not decompose at 200–250 °C into brittle fragments. When exposed to flame, Kynol carbonises into a stable, insulating char that continues to seal and that produces very little smoke and no halogenated gases. That combination is why Kynol yarn is specified for braided packing in:

  • Fire-risk gland service — chemical pumps, valve stems and agitator shafts inside plants with hazardous-area classifications.
  • Chemical service at pH 1–13 — strong acids and strong alkalis where PTFE yarn would cold-flow and aramid would hydrolyse.
  • High-purity applications — pharmaceuticals, food-grade and semiconductor rinse lines where halogens and smoke must be avoided.
  • Marine and offshore — where non-combustible, low-smoke materials are required by SOLAS and IMO fire-safety rules.

For lower-temperature, non-fire-risk service, compare with PTFE Packing or Graphite PTFE Packing. For higher-temperature inert-atmosphere service, compare with Graphite Packing.

PR117 Yarn Specification — Full Construction Options

Table 1 — Yarn construction, core type and impregnation options
Parameter Value / Option Sizing Note
Product model Kaxite PR117 Spun Kynol fibre yarn
Base fibre 100% Kynol novoloid (phenolic) fibre Halogen-free, inherently flame retardant
Construction Spun yarn, square or round cross-section, with or without core Cross-section sized to your gland
Core option Normal (no core) / Glass fibre core Glass core adds tensile strength for high-speed shafts
Impregnation option Plain / PTFE + silicone oil impregnated Impregnated version lowers friction and shaft wear
Limit Oxygen Index (LOI) ≥ 32 % Inherently flame retardant; no halogen additives
Continuous temperature 150 °C Stable in air and steam service
Short-term peak 250 °C For upset conditions, not continuous service
pH range 1 – 13 Handles strong acids and strong alkalis
Flame behaviour No melt · No drip · Char-forming Forms insulating protective char
Smoke / halogen emission Very low smoke · Halogen-free Meets low-smoke fire-safety requirements
Typical packed applications Braided gland packing, fire-safe gaskets, valve stem packing Yarn can also be supplied for weaving
Customization Yarn count, core, impregnation, coil length, OEM label Send gland drawing or yarn count
Quotation basis Yarn count, core option, impregnation, quantity, destination port Reply within 24 hours

Kynol vs PTFE vs Aramid — Where Each Yarn Fits

Kynol (PR117) Fire-safe · pH 1–13 · 150 °C Best choice for fire-risk gland service, halogen-free plants, and chemical service at both strong acid and strong alkali pH. No melt, no drip, forms protective char.
PTFE Yarn Chemically inert · Low friction · ≤ 260 °C Best for non-fire-risk chemical pumps and valves where chemical inertness matters more than flame resistance. Cold-flows at high load.
Aramid Yarn High tensile · High speed · 250 °C Best for high-speed, high-pressure pumps where tensile strength is critical. Hydrolyses in strong alkali; not for fire-risk halogen-free service.
Graphite PTFE Yarn Thermal conductivity · Wide pH · 260 °C Best for high-temperature, high-friction pumps where heat needs to escape the gland quickly.

For a finished braided packing made from this yarn, browse our Braided Packing range. For other yarn types, see Packing Materials.

Typical Applications of Kynol Fibre Yarn

Chemical & Petrochemical Pump glands, valve stems, agitator shafts Halogen-free, pH 1–13 — safe where a gland fire would be catastrophic.
Pharmaceutical & Food High-purity rinse lines, sterile pumps No halogenated decomposition products; low smoke; clean burn-out.
Marine & Offshore Engine rooms, deck machinery, LNG plants Meets SOLAS / IMO non-combustible and low-smoke requirements.
Metallurgy & Foundry Furnace door seals, hot-gas valve stems Char-forming behaviour protects the seal under flame impingement.
Power Generation Boiler-feed pump glands, steam valve stems Stable at 150 °C continuous; short-term peaks to 250 °C.
Fire-Safe Gaskets Yarn for weaving fire-safe gasket cloth Supplied as yarn for your own weaving or as finished packing.

How to Order PR117 — What to Send Us

  • Yarn count or gland size: yarn count (tex / denier) or the finished packing cross-section you need.
  • Core option: normal (no core) or glass fibre core.
  • Impregnation: plain or PTFE + silicone oil impregnated.
  • Quantity: kilograms of yarn or number of coils.
  • Working conditions: medium, pH, operating pressure, temperature and shaft speed.
  • Destination port: for FOB Ningbo or CIF quotation.

Send these details and Kaxite replies within 24 hours with a factory-direct quotation, lead time and a free sample of the exact yarn construction for your own bench test.

Frequently Asked Questions

What is Spun Kynol Fiber Yarn?
Kaxite PR117 is a spun yarn made from 100% Kynol novoloid (phenolic) fibre. It is halogen-free, inherently flame retardant, will not melt or drip, and forms a protective char under flame. It is used as the base yarn for braided gland packing in fire-risk, chemical and high-purity service.
Why choose Kynol over PTFE or aramid yarn?
Kynol resists both strong acids and strong alkalis (pH 1–13), does not melt or drip in a fire, emits very little smoke and no halogenated gases, and stays stable at 150 °C continuous with short-term peaks to 250 °C. PTFE cold-flows at high load; aramid hydrolyses in strong alkali and is not halogen-free in fire.
What is the glass fibre core for?
The glass fibre core is added for higher tensile strength, which is useful in high-speed rotating shafts where the packing must resist centrifugal pull and extrusion. The plain version is used where maximum flexibility and clean burn-out are required.
What does PTFE and silicone oil impregnation do?
Impregnation lowers the coefficient of friction between the packing and the shaft, reduces running temperature, and slows sleeve wear. It is recommended for high-speed pumps and for start-stop duty where dry running may occur.
Can Kaxite supply custom yarn counts and OEM packing?
Yes. Yarn count, core option, impregnation, coil length and OEM labelling are all customizable. Send your yarn count or finished packing cross-section and we will confirm the construction.
Do you provide samples and material data?
Yes. A free sample of the exact yarn construction is available for qualified buyers. Material data sheet covering fibre composition, LOI, temperature limits and pH range is provided with each shipment.

Need a factory price for Spun Kynol Fiber Yarn PR117? Send your yarn count, core option, impregnation and quantity — Kaxite replies within 24 hours with a factory-direct quotation and free sample offer.

Get Factory Price Now
Send Inquiry
Contact Info

Request a Quote or Technical Consultation

Share your sealing requirement and our technical sales team will respond within 24 business hours. For fastest service, include your flange specification, operating pressure, temperature, and process media in the message below.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept