Products
- Gaskets
- Spiral Wound Gaskets
- Expanded Graphite Gaskets
- Ring Joint Gaskets
- Corrugated Gaskets
- PTFE Gaskets
- Double Jacket Gaskets
- Asbestos Rubber Gaskets
- Serrated Gaskets
- Non-asbestos Gaskets
- Gasket Tape
- Copper Gaskets
- Flange Insulation Gasket Kits
- Rubber Gaskets
- Ceramic Fiber Gaskets
- Rubber O Ring
- Rubber-steel Metal Gaskets
- Braided Packing
- Compression Sheets
- Sealing Materials
- Insulation Products
- Sealing Machines
- Sealing Tools
- Ptfe Products
Products
- View as
Buna-N Nitril O RINGS
Buna-N Nitril O RINGS offer excellent sealing properties and mechanical properties with low cost. Buna and Nitrile O-rings have a basic resistance to common lubricants and are recommended for crude oil, gasoline, propane, petroleum oils and water. Nitrile and Buna O-rings are used in engines, gearboxes, aircraft pumps, and common water applications.
Read MoreSend Inquiry
Viton O Ring
Viton O Ring has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Low temperature resistance is normally not favorable and for static applications is limited to approximately -26°C (-15°F) although certain compounds are suitable down to -46°C (-50°F). Under dynamic conditions, the lowest service temperature is between -15°C and -18°C (5°F and 0°F). Gas permeability is very low and similar to that of butyl rubber. Special FKM compounds exhibit an improved resistance to acids and fuels
Read MoreSend Inquiry
Ceramic Fiber Gasket
ceramic fiber gaskets are soft, lightweight and resilient, and have superior thermal characteristics. They are the perfect choice where an inexpensive heat seal with low sealing pressure is required. Since they are soft and can be easily laminated to form thicker seals, the flange finish is not particularly important when using this material
Read MoreSend Inquiry
FKM Viton Rubber Gasket Washers
FKM Viton Rubber Gasket Washers comes standard in a 75 +/-5 Durometer Shore A Hardness with a light cloth finish. FKM (Viton™) is rated for use in applications involving temperatures up to +450 F constant or +500 F intermittent. FKM (Viton™) also offers excellent chemical, gas & oil resistance which makes it a good choice for a variety of applications.
Read MoreSend Inquiry
Silicon Rubber Tri-clamp Santary Gasket
This Silicon Rubber Tri-clamp Santary Gasket are ideal for distillers, since silicone is both temperature and ethanol resistant unlike most standard black rubber gasket, This silicone tri-clover gasket will fit any of our 1.5" ferrules on the still towers or milk can boilers (thermowell and fill ports).
Read MoreSend Inquiry
PTFE Tri Clamp Screen Sanitary Gasket with SS 316 mesh
PTFE Tri Clamp Screen Sanitary Gasket with SS 316 mesh A Tri Clover Compatible Clamp and Gasket along with a pair or Tri Clover fittings is required to make a complete connection. Brewers Hardware carries sanitary tri clover tri clamp gaskets in four different materials:Silicone,EPDM,PTFE,BUNA-N.
Read MoreSend Inquiry