Products
PTFE Flexible Coupling

PTFE Flexible Coupling

Model:PTFE Flexible Coupling
Chemically inert PTFE flexible joint for glass and metal tube lines: damps vibration, takes up misalignment, rated to +260 °C, made to your bore, length and end connection.

Product data sheet · PTFE Parts

PTFE Flexible Coupling: Custom, Chemical-Resistant Joints for Glass and Metal Tube Lines

A PTFE flexible coupling is a short, chemically inert joint that absorbs vibration, small misalignment and thermal movement between a glass or metal tube and the line it connects to. Kaxite machines and moulds these couplings to your drawing — bore, length and end connection included — so the part fits the pipework you already have instead of forcing you into a catalogue size.

Material
Virgin or modified PTFE, filled grades on request
Service temperature
−200 °C to +260 °C, typical for unfilled PTFE
Supply basis
Made to drawing, prototype to production

Specification at a glance

Bore and length
Machined to your drawing, no fixed catalogue steps
End connections
Plain for hose clamp, flanged, threaded or barbed
Pressure and vacuum
Confirmed per design; support collar advised for vacuum
Chemical service
Inert to most acids, bases and solvents
Colour
Natural white; filled grades differ
Order quantity
Single prototypes to production batches

01What the part does on a real line

On site the coupling usually sits between two tube ends: a glass sparger, sight glass or dosing head on one side, and a metal pipe, pump outlet or manifold on the other. It is soft enough to flex, strong enough to hold line pressure, and inert enough that the fluid never touches metal. That combination is why it turns up wherever a rigid connection would crack, leak or transmit noise into an instrument line.

The part earns its place by doing four jobs at once:

  • Vibration isolation. Pump, agitator and dosing-head vibration stops at the coupling instead of travelling into glassware, electrodes and pressure gauges.
  • Misalignment take-up. A few millimetres of axial offset, or a degree or two of angle, no longer loads the tube wall — normal on skid-built and field-assembled pipework.
  • Thermal movement. Glass and stainless steel expand at very different rates; a flexible PTFE section absorbs the difference without the fatigue cracking you get from a rigid metal bellows.
  • Electrical and thermal isolation. The joint breaks the conductive path, which helps on mixed-metal lines where galvanic corrosion starts, and on lines carrying stray current.

Two limits are worth stating before you specify one. PTFE creeps under sustained load, so the coupling is a joint and not a support: the tube line must carry its own weight, and the coupling must never be used to pull two misaligned pipes together. Unfilled PTFE is also an electrical insulator, the wrong choice for flammable or static-sensitive media — specify a carbon-filled conductive grade for those.

02Construction and PTFE grade options

The coupling is either machined from PTFE rod or moulded, depending on the profile and the quantity. A plain sleeve is the simplest and the cheapest; a contoured or bellows section gives more movement for the same wall thickness. Each end is made to match the mating part: a plain spigot for a hose clamp, a flared or flanged face, a thread, or a barb for flexible tubing.

Table 1 — Grade selection for PTFE flexible couplings
Grade Best for Watch out for
Virgin PTFE, natural white Aggressive acids, solvents, and food or pharma lines where documentation is required Lowest creep resistance; moves most under sustained load
Modified PTFE Vacuum service, cycling duty, and parts that must hold dimensions Higher material cost than virgin grade
Carbon or graphite filled Flammable or static-sensitive media; higher pressure duty Dark colour, and the filler must be checked against the media
Glass-fibre filled Stiff components such as backing collars and adaptor rings More abrasive against mating surfaces

If the line carries food, pharmaceutical or high-purity product, ask which grade can be documented before you order, not after. We will tell you what the certificate covers and which standard the batch is tested against.

PTFE flexible coupling machined to drawing with a plain end for hose-clamp connection
PTFE flexible coupling made to drawing — natural white virgin PTFE with a plain end for hose-clamp connection. Bore, length and end finish follow the customer drawing.

03Typical properties of the material

These are reference values for unfilled PTFE at room temperature — the numbers most often requested in a material datasheet. The finished coupling is inspected against the drawing, not against this table.

Table 2 — Reference properties of unfilled PTFE
Property Typical value Why it matters on this part
Density 2.14 – 2.20 g/cm³ Mass and material cost estimates
Tensile strength 25 – 35 MPa Wall thickness for pressure duty
Elongation at break 300 – 400 % Flexes without cracking at the clamp line
Coefficient of friction 0.04 – 0.10 Low breakaway force when sliding over a tube end
Water absorption < 0.01 % Dimensionally stable in wet and washdown service
Dielectric strength 60 – 100 kV/mm Electrical isolation between dissimilar metals
Continuous service temperature −200 °C to +260 °C Steam, cryogenic and hot chemical lines
Chemical resistance Inert to most acids, bases, solvents and oxidisers Long service life in aggressive media

Filled grades trade some chemical range for stiffness, conductivity or creep resistance. Confirm the selected grade against the actual media list, concentration and temperature before release to production.

04Where these joints are used

Because the coupling is custom-made, it appears in places where a standard rubber or metal expansion joint would contaminate the product or fail the media:

  • Chemical dosing and transfer lines, where diaphragm pumps vibrate and the fluid attacks metal.
  • Electroplating and surface-finishing lines, including headers built from PTFE lined pipe.
  • Semiconductor wet benches, high-purity water loops and chemical delivery cabinets.
  • Glass pilot plants, reactors, sight glasses and laboratory apparatus.
  • Pharmaceutical and biotech process lines that need cleanable, inert wetted parts.
  • Water and wastewater chemical feed systems handling hypochlorite, ferric chloride or caustic.

The joint is only as inert as the rest of the wetted path, so it is usually specified together with the line it serves. Where the run also needs a flexible section, PTFE tube in the same grade keeps the whole wetted surface consistent; where the header is steel, a lined pipe does the same job upstream.

05What to send with your enquiry

A photograph with a ruler in frame is enough to start. A sketch or CAD file gets you a firm price faster. The eight items below are what our engineers ask for first, and answering them in one message usually removes a day of back-and-forth.

Table 3 — Order data sheet for a made-to-drawing coupling
Item What to state Example
Line size Inside diameter at the joint 12 mm ID
Installed length Face-to-face length, or the gap it must fill 60 mm
End connection How each end attaches Hose clamp, both ends
Media Fluid, concentration and temperature 30 % sulphuric acid at 60 °C
Pressure and vacuum Working value plus surge 0.4 MPa, no vacuum
Movement Axial, lateral or angular ±3 mm axial, 2° angular
Duty Continuous or cycling 8 h/day, 6 cycles/h
Documentation Certificates or reports required Material certificate, dimensional report

Quantity, destination and required delivery date complete the picture. Minimum order quantity depends on the bore and grade rather than on a fixed rule, so ask for the figure for your own part — and if you are still at design stage, say so. Reviewing a custom PTFE part before the drawing is frozen is always cheaper than changing it after the first batch. You can send your drawing and process data straight to our technical sales team.

06Installation rules that decide service life

  • Support both tube ends. The coupling takes movement, not weight.
  • Clamp evenly. One over-tightened worm drive distorts the PTFE wall; two clamps, a proper flange or a profiled collar spread the load.
  • Keep within the design movement. A coupling sized for 3 mm of axial travel will not forgive 10 mm.
  • Align first, then fit. Never use the coupling to close a gap between pipes.
  • Plan for vacuum. On suction lines a support collar, or a shorter and thicker wall, prevents collapse.
  • Inspect at shutdowns. Whitening, ovality or a visible bulge at the clamp line are early signs of over-loading or creep.

07Why buyers place repeat orders with Kaxite

Kaxite has supplied sealing components from Ningbo since 2015. This part is a small but representative example of how the workshop operates: an engineer reviews the drawing before a price is issued, the part is machined or moulded in-house, and the batch leaves with the inspection record agreed at order stage.

  • Drawing review and grade recommendation before quotation, not after.
  • In-house machining and moulding at our Ningbo workshop.
  • Material certificate and dimensional report per batch, on request.
  • English-speaking technical sales, with enquiries answered within 2 business hours.
  • Export packing that protects thin-wall and thin-flange parts in transit.

08Common questions, answered directly

What is a PTFE flexible coupling used for?

It connects a glass or metal tube end to a line while absorbing vibration, small misalignment and thermal movement. The PTFE body is inert to most process fluids, so the joint suits chemical, plating, high-purity water, pharmaceutical and laboratory service where a rubber sleeve would swell or a metal bellows would corrode.

Can it join a glass tube to a metal pipe?

Yes — that is one of the most common uses. Glass and stainless steel expand at different rates, and the flexible PTFE section absorbs the difference. Support both ends independently and keep the clamps away from the glass bead, because a point load on glass causes most failures, not the coupling itself.

What temperature and pressure can it handle?

Unfilled PTFE is rated for continuous service from −200 °C to +260 °C. Pressure capability is not a single number: it depends on bore, wall thickness, temperature, end support and whether the line is under vacuum, so we confirm it per drawing. For vacuum or high-pressure duty a support collar or a thicker wall is normally part of the design.

Is a food-grade or pharmaceutical grade available?

Yes. Tell us which standard your audit requires — for example FDA 21 CFR 177.1550, EU 10/2011 or USP Class VI — and we will confirm which grade we can supply with supporting documentation before you place the order.

Do you make small quantities and custom sizes?

Yes. Every coupling is made to drawing, so a single prototype and a production batch follow the same route. Minimum order quantity depends on bore, grade and whether a new mould is needed; ask for the figure against your own drawing rather than a generic number.

How quickly will I get a quotation?

Send the drawing or a dimensioned sketch with media, temperature and pressure, and technical sales will reply within 2 business hours. If a grade or wall thickness needs checking with production, we will say so in the same reply and give you the date the confirmation will follow.

Send the drawing — get a price and a grade recommendation

Bore, length, end connection, media, temperature and pressure are enough to start. Technical sales replies within 2 business hours.

Typical values only. Confirm grade, dimensions and pressure rating against your drawing before release. Technical content reviewed by Kaxite application engineering, Ningbo, China.

Send Inquiry
Contact Info

Request a Quote or Technical Consultation

Share your sealing requirement and our technical sales team will respond within 24 business hours. For fastest service, include your flange specification, operating pressure, temperature, and process media in the message below.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept