Products
Rubber Seal Strip

Rubber Seal Strip

Model:KXT B400S
Rubber seal strip Materials: EPDM, TPE, Silicone, Viton, NBR, Neoprene, PVC, etc

What is Rubber Seal Strip KXT B400S and what materials can it be made from?

Rubber Seal Strip KXT B400S is a flexible extruded rubber profile used for weather sealing, edge protection, gap filling and anti-vibration duties. Kaxite supplies a comprehensive range of profiles in EPDM, TPE, Silicone, Viton (FKM), NBR (Nitrile), Neoprene (CR) and PVC — each offering different combinations of weather resistance, oil resistance, temperature range and cost.

Because seal strip requirements differ widely by application, Kaxite manufactures both standard stock profiles and fully custom extrusions based on customer drawings. Buyers can specify the compound, hardness, profile geometry, and length to match the target equipment or installation. Manufactured by Ningbo Kaxite Sealing Materials Co., Ltd., a China-based rubber products supplier with more than 10 years of experience.

Rubber Seal Strip KXT B400S
Available Compounds
EPDM TPE Silicone Viton (FKM) NBR Neoprene (CR) PVC
Multiple Profile Shapes U-channel, D-profile, P-profile, E-profile, rectangular and custom extrusions.
Multiple Colors Black, grey, white, and custom colors on request (subject to compound).
Hardness Range Typically 40–80 Shore A depending on compound — softer for weather seals, harder for edge trim.
Custom Cut Lengths Coil or straight lengths cut to spec. Mitre cutting and corner vulcanization on request.

Which rubber compound should you choose for your seal strip?

Direct answer: Choose EPDM for outdoor weather sealing and UV resistance; NBR for oil and fuel contact; Silicone for extreme temperature range; Viton (FKM) for aggressive chemicals and high temperature; Neoprene for balanced weather and moderate oil resistance; TPE for recyclable and colorable consumer applications; PVC for cost-sensitive, low-temperature-indoor applications.
EPDM Weather

Best for: Outdoor sealing, windows, doors, automotive exterior, roofing.

Outstanding UV, ozone and weather resistance. Wide temperature range. Poor oil resistance.

NBR (Nitrile) Oil

Best for: Oil and fuel contact seals, hydraulic equipment, engine bays.

Excellent oil and fuel resistance. Moderate weather resistance. Good abrasion performance.

Silicone High Temp

Best for: Extreme temperature range from -60°C to +200°C, food-grade, medical.

Excellent temperature range. Good weather resistance. Moderate mechanical strength.

Viton (FKM) Chemical

Best for: Aggressive chemicals, high-temperature fuel and oil service.

Excellent chemical and temperature resistance. Higher cost than other compounds.

Neoprene (CR) Balanced

Best for: General outdoor and industrial sealing with moderate oil exposure.

Balanced weather, oil and flame resistance. Good mechanical properties.

TPE Recyclable

Best for: Consumer products, colored profiles, co-extruded seals.

Recyclable, easily colored, good soft-touch feel. Limited high-temperature performance.

PVC Economy

Best for: Indoor, cost-sensitive sealing where temperature and UV exposure are limited.

Low cost and easy to extrude in complex profiles. Limited UV and low-temp performance.

What profile shapes does Kaxite supply?

Direct answer: Kaxite supplies almost all common rubber seal strip profile styles, including U-channel, D-profile, P-profile, E-profile, rectangular strip, and fully custom extrusions based on customer drawings.
U-Channel Edge trim and glass or panel mounting
D-Profile Door and window weather sealing
P-Profile Push-on sealing with bulb
E-Profile Multi-finger wiping seal
Rectangular Strip Flat gaskets and spacer strips
Custom Extrusion Designed to your drawing

Where is Rubber Seal Strip used?

Direct answer: Rubber seal strips are used across automotive, construction, industrial equipment, appliances, and HVAC applications for weather sealing, dust protection, vibration isolation and gap filling.

Automotive

Door and window seals, trunk seals, sunroof seals, engine bay edge trim, and anti-vibration strips. EPDM is the most common compound for exterior automotive sealing.

Construction & Building

Window and door weather seals, curtain wall gaskets, expansion joint seals and glazing gaskets. EPDM and silicone are widely used outdoors.

Industrial Equipment

Machine guarding edge trim, cabinet seals, control panel gaskets, vibration isolation strips and dust protection. NBR, Neoprene or Viton depending on media.

Appliances & HVAC

Refrigerator door seals, oven door gaskets, air handling unit seals and HVAC duct sealing. Silicone for high temperature, EPDM for general use.

Oil & Fuel Equipment

Seals for fuel systems, hydraulic equipment and oil-handling machinery. NBR or Viton recommended for oil and fuel contact.

Food & Medical

Food-grade and medical-grade silicone seal strips for equipment doors, enclosures and clean-room applications.

Can Kaxite customize the seal strip for your application?

Direct answer: Yes. Kaxite manufactures custom extrusions to customer drawings, offers OEM/ODM branding, and supports custom compound selection, hardness, color and cut length. Because requirements differ widely, buyers should provide a profile drawing or sample for accurate quotation.
Custom Profile Design Send us a cross-section drawing or physical sample — Kaxite will produce the extrusion die.
Compound & Hardness Specify EPDM, NBR, Silicone, Viton, Neoprene, TPE or PVC and target hardness.
Color Matching Black, grey, white and custom colors (subject to compound availability).
OEM / ODM Private-label packaging and branding available on request.

Frequently asked questions about Rubber Seal Strip

What materials can Rubber Seal Strip KXT B400S be made from?

Kaxite supplies seal strips in EPDM, TPE, Silicone, Viton (FKM), NBR (Nitrile), Neoprene (CR) and PVC. Each compound offers a different combination of weather resistance, oil resistance, temperature range and cost, so the best choice depends on the application.

What is the difference between EPDM and NBR seal strip?

EPDM is best for outdoor weather sealing — excellent UV and ozone resistance but poor oil resistance. NBR is best for oil and fuel contact — excellent oil resistance but moderate weather resistance. Choose based on whether the application is primarily outdoor exposure or oil contact.

Can Kaxite manufacture a custom profile shape?

Yes. Kaxite manufactures custom extrusions based on customer drawings or physical samples. Provide the cross-section drawing with dimensions or a sample for the fastest quotation.

What hardness range is available?

Seal strips are typically produced in the 40–80 Shore A range depending on the compound. Softer compounds are used for weather seals and gap fillers; harder compounds for edge trim and mechanical protection.

What colors are available?

Black and grey are standard colors. White and custom colors are available on request for most compounds, subject to minimum order quantities.

Can you supply cut-to-length strips?

Yes. Kaxite supplies seal strips in coil form or cut to specified straight lengths. Mitre cutting, corner vulcanization and pre-punched holes can also be arranged.

What is the minimum order quantity?

MOQ depends on the profile and compound. For standard stock profiles, smaller quantities can be negotiated. For custom extrusion dies, MOQ is typically higher to cover tooling costs. Confirm with Kaxite's sales team for accurate numbers.

What lead time should I expect?

Sample lead time for standard profiles is typically 5–7 days. Custom extrusion production lead time is typically 15–25 days after tooling approval and order confirmation, depending on profile complexity and quantity.

How is the seal strip packed and shipped?

Standard export packing is coil or carton, then palletized for sea freight. Typical shipment is via Ningbo or Shanghai Port under FOB, CIF or EXW terms. Air freight and courier are available for samples and urgent orders.

Do you support OEM / ODM branding?

Yes. Private-label packaging and branding are available on request. Submit your logo and packaging specifications for confirmation.

Send us your seal strip drawing for a same-day quotation

Share your compound, profile cross-section drawing (or sample), hardness, color, and required length. Kaxite's technical team will respond within 2 business hours with pricing, tooling lead time and MOQ. For custom extrusions, a physical sample or DWG/PDF profile drawing gives the fastest result.

Last reviewed: September 2026 · Kaxite Sealing Technical Team

Send Inquiry
Contact Info

Request a Quote or Technical Consultation

Share your sealing requirement and our technical sales team will respond within 24 business hours. For fastest service, include your flange specification, operating pressure, temperature, and process media in the message below.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept