Mica Tape Filler Used for Making Spiral Wound Gasket

Mica Tape Filler Used for Making Spiral Wound Gasket

Product number:MR 107

Quick Overview: Mica tape has outstanding flame-resistant characteristics (acts as a fire wall) and exhibits excellent electrical insulating properties at high temperatures. It can continue to operate during a fire or in high temperature environments (up to 950° C natural mica tape & 1100° C for synthetic mica tape). Due to considerable flexibility and high tensile strength, Mica tape can be easily applied by high speed (up to 3000 rpm) standard vertical or longitudinal taping equipment (one or more layers with an overlap of 10-50% acc. to the applicable norm). Mica tape is free of asbestos, halogens and toxic gases and very good material for Spiral wound gasket. You can have good quality Mica Tape Filler Used for Making Spiral Wound Gasket

Send Inquiry

PDF DownLoad

Product Description

Description

Mica tape filler used for Making Spiral Wound Gasket has outstanding flame-resistant characteristics (acts as a fire wall) and exhibits excellent electrical insulating properties at high temperatures. It can continue to operate during a fire or in high temperature environments (up to 950° C natural mica tape & 1100° C for synthetic mica tape).

Due to considerable flexibility and high tensile strength, Mica tape can be easily applied by high speed (up to 3000 rpm) standard vertical or longitudinal taping equipment (one or more layers with an overlap of 10-50% acc. to the applicable norm).


Mica tape is free of asbestos, halogens and toxic gases and very good material for Spiral wound gasket. You can have good quality Mica Tape Filler Used for Making Spiral Wound Gasket from us Kaxite


Application

Mica Tape filler for spiral wound gasket. 


Advantages

1. Excellent insulating property.

2. High temperature and pressure resistance

3. Flexible, high tensile

4. Excellent electrical insulating properties and sound insulation performance

5. Asbestos free, corrosion resistance, not effect with liquid aluminum 


Specification

Temperature

800℃

Medium

Hot water, high temperature and high pressure condition, steam, heat transfer medium, ammonia, hydrogen, organic solvents, hydrocarbons, low temperature liquids, etc

PH

2~13

Presssure

<4 MPa

Density

2.45g/cm3

Thickness

0.5~1.0mm

width

5.6~6.0mm/3.9~4.3mm is for 4.5/3.2mm of SWG

Related Category