Aramid Fiber Packing
Introduction to Aramid Fiber Packing
Aramid fiber packing is a high-performance sealing material widely used in industrial applications due to its exceptional strength, thermal stability, and chemical resistance. It is made from synthetic aramid fibers, which are known for their durability and ability to withstand extreme conditions. This type of packing is ideal for sealing pumps, valves, and other equipment in industries such as chemical processing, oil and gas, and power generation.
Key Features and Benefits
- High tensile strength and abrasion resistance
- Excellent thermal stability, operating temperatures from -100°F to 500°F (-73°C to 260°C)
- Superior chemical resistance to acids, alkalis, and solvents
- Low coefficient of friction, reducing wear on equipment
- Non-conductive and non-magnetic properties
- Long service life, reducing maintenance costs
Product Specifications
Below is a detailed table of specifications for standard aramid fiber packing products:
| Parameter | Value | Unit |
|---|---|---|
| Material Composition | 100% Aramid Fiber | - |
| Density | 0.9 - 1.2 | g/cm³ |
| Tensile Strength | ≥ 3000 | MPa |
| Maximum Operating Temperature | 500 | °F |
| Minimum Operating Temperature | -100 | °F |
| pH Range | 2 - 12 | - |
| Compression Set | < 15 | % |
| Thermal Conductivity | 0.04 - 0.06 | W/m·K |
Applications of Aramid Fiber Packing
- Chemical processing plants for sealing aggressive fluids
- Oil and gas industry in valves and pumps handling hydrocarbons
- Power generation equipment, including turbines and boilers
- Marine applications for sealing shafts and propellers
- Automotive industry in high-temperature environments
- Pharmaceutical manufacturing where cleanliness is critical
Installation Guidelines
Proper installation is crucial for optimal performance of aramid fiber packing. Follow these steps:
- Clean the stuffing box thoroughly to remove old packing and debris.
- Measure and cut the packing rings to the correct size, ensuring a snug fit.
- Install the rings staggeredly, with joints offset by at least 90 degrees.
- Tighten the gland evenly, avoiding over-compression which can cause excessive wear.
- Run the equipment and adjust the tension as needed for minimal leakage.
Frequently Asked Questions (FAQ)
What is aramid fiber packing used for?
Aramid fiber packing is primarily used for sealing applications in high-temperature and corrosive environments, such as in pumps, valves, and compressors across various industries including chemical, oil and gas, and power generation.
How does aramid fiber packing compare to other packing materials?
Aramid fiber packing offers superior strength, thermal stability, and chemical resistance compared to traditional materials like asbestos or PTFE. It is more durable and has a longer service life, making it cost-effective for demanding applications.
Can aramid fiber packing handle high-pressure applications?
Yes, aramid fiber packing is designed to withstand high pressures, typically up to 2000 psi or more, depending on the specific product and installation conditions. Its high tensile strength and resilience make it suitable for such environments.
Is aramid fiber packing resistant to all chemicals?
While aramid fiber packing has excellent resistance to a wide range of chemicals, including acids, alkalis, and solvents, it may not be suitable for strong oxidizing agents or certain concentrated acids. Always check compatibility charts for specific chemicals.
How long does aramid fiber packing last?
The lifespan of aramid fiber packing varies based on operating conditions, such as temperature, pressure, and media. With proper installation and maintenance, it can last several years, significantly reducing downtime and replacement costs.
Can aramid fiber packing be used in food-grade applications?
Standard aramid fiber packing is not typically certified for food-grade use due to potential contamination risks. However, specialized versions with FDA-approved coatings may be available for such applications.
How should I store aramid fiber packing?
Store aramid fiber packing in a cool, dry place away from direct sunlight and chemicals. Keep it in its original packaging to prevent contamination and maintain its properties until use.
Does aramid fiber packing require lubrication?
In some cases, lubrication may be recommended during installation to reduce friction and wear. However, many modern aramid fiber packings are pre-lubricated or designed to operate without additional lubricants.
What sizes are available for aramid fiber packing?
Aramid fiber packing is available in various sizes, typically ranging from 1/8 inch to 1 inch in cross-section, and can be customized to meet specific requirements. Common forms include coils, rings, and spools.
Is aramid fiber packing environmentally friendly?
Aramid fiber packing is generally considered environmentally friendly as it is made from synthetic fibers that are non-toxic and do not release harmful substances. It is also recyclable in some regions, reducing waste.
- View as
Aramid Fiber Packing with PTFE impregnated
Aramid Fiber Packing with PTFE impregnated is an interlace, square braid packing manufactured from Kevlar Aramid fibres impregnated with PTFE dispersion and specially treated with a silicon-based compound for quick and easy break-in. Aramid fiber offers a unique combination of extremely high tensile strength, lasting resilience, low thermal expansion, low coefficient of friction and wide chemical resistance.
White PTFE Packing with Aramid Corners
White PTFE Packing with Aramid Corners This packing is a multi-yarns packing. The corners of packing are made of aramid fiber yarns impregnated with PTFE, the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Spun Kevlar Packing
Spun Kevlar packing braided from high quality Dupont Kevlar fiber with PTFE impregnated and lubricant additive. Compared with other kinds of packings. It can resist more severe media and high pressure.
Nomex Fiber Packing With Rubber Core
Nomex Fiber Packing With Rubber Core The rubber core can absorb vibration to control leakage. Normally use silicone rubber core.
Nomex Fiber Packing
Nomex Fiber Packing braided from high quality Dupont Spun nomex yarns with PTFE impregnated and lubricant additive, high cross-sectional density and structural strength, good sliding characteristic, gentle on shaft. Compared to kevlar, not hurt shaft, good idea for food industries.
Graphite Spun Aramid Fiber Packing
Graphite Spun Aramid Fiber Packing Spun aramid packing impregnated with graphite. No harm to shaft, still wearable, good heat conduction.
Kaxite is a leading China Aramid Fiber Packing manufacturer, supplier and exporter. Adhering to the pursuit of perfect quality of products, so that our Aramid Fiber Packing have been satisfied by many customers. Extreme design, quality raw materials, high performance and competitive price are what every customer wants, and that's also what we can offer you. Of course, also essential is our perfect after-sales service. If you are interested in our Aramid Fiber Packing services, you can consult us now, we will reply to you in time!
