Products
Non-Rounded Spiral Wound Gaskets

Non-Rounded Spiral Wound Gaskets

Model:KXT-630
Kaxite KXT-630 Non-Rounded Spiral Wound Gaskets are custom oval and oblong gaskets for boiler handholes, manholes and pressure vessel access doors. Made to your A×B inside dimensions with SS316 winding and graphite filler. No MOQ, no tooling cost, 2-hour technical quote, EN 10204 3.1 certificates.
Model KXT-630 · Made to Order

Oval & Oblong Spiral Wound Gaskets for Boiler Handholes & Manholes

Boiler handhole and manhole openings are never round — they are oval or elongated, and no standard spiral wound gasket will fit them. Kaxite manufactures oval and oblong spiral wound gaskets to your exact inside dimensions, in the winding metal and filler you specify, for saturated steam, superheated steam and high-pressure boiler service.

There is no international standard for this gasket style. Every boiler make and every manhole cover has its own geometry — that is why Kaxite builds each gasket to your drawing or measurements instead of quoting a catalogue number. Send your A × B × b × s dimensions and Kaxite replies with a technical recommendation, price and delivery date within 2 business hours.

No MOQ · No tooling cost · Single-piece shutdown orders accepted

Get Quote in 2 Hours

Updated: September 2026 · Technical review by Kaxite Sealing Technical Sales Team, Ningbo Kaxite Sealing Materials Co., Ltd.

Oval and oblong spiral wound gaskets are custom-made to the inside dimensions of your boiler handhole or manhole opening. Provide inside length A × inside width B × gasket width b × thickness s, plus winding metal (typically SS316) and filler (typically graphite), and Kaxite produces the gasket in-house — no tooling cost, no minimum order, EN 10204 3.1 certificates available on request.

Non-Rounded Spiral Wound Gaskets oval and oblong styles for boiler handholes
Non-Rounded Spiral Wound Gaskets — oval and oblong styles for boiler handholes and manholes.

Why a Round Gasket Cannot Replace These

Buyers sometimes ask whether a standard circular spiral wound gasket can replace a handhole opening gasket. The answer is almost always no, for three practical reasons:

  • The opening is not circular. A round gasket laid over an oval opening will either overhang the seat or leave part of the joint unsealed — both are leak paths.
  • The cover is designed for the shape. Manhole and handhole covers are matched to the opening profile. A round gasket cannot be compressed evenly across an oval seat, so the bolt load is distributed unevenly.
  • Cut sheet gaskets do not survive the cycle. These joints are opened and closed on every boiler inspection. A cut non-asbestos or graphite sheet gasket relaxes, extrudes and eventually blows out under repeated bolt re-torquing. A spiral wound gasket keeps its spring-back because the metal winding acts as a spring.
How to measure oval and oblong spiral wound gaskets A B b s
Measure inside length A, inside width B, gasket width b and thickness s before ordering.

Oval vs Oblong — Which One Do You Have?

Both profiles are wound on the same equipment using the same V-shaped metal strip and filler. The difference is purely the path the winding follows around the opening — and that path is determined by the shape of your handhole or manhole seat.

Oval Style Elliptical profile

A true elliptical shape with two clearly different axes. This is the classic handhole profile on many older boiler designs and small manhole covers.

Dimensions are given as inside length A × inside width B, plus gasket width b and thickness s.

Best for: standard boiler handhole and small manhole covers with an oval opening.
Oblong Style Elongated / stadium profile

An elongated shape with two parallel long sides joined by rounded ends. Used where the opening is longer than a simple oval, or where the cover is rectangular with heavily radiused corners.

Same dimensioning convention: inside length A × inside width B, width b and thickness s, or supplied to drawing.

Best for: elongated manhole covers, inspection openings and rectangular access doors.
Not sure which profile you have? Measure the inside opening of the flange or cover seat — length, width, and the gasket seating width. A photo with a ruler in frame is usually enough for Kaxite to confirm the shape and quote within the same working day.

How to Measure Your Handhole or Manhole

Because there is no standard for this gasket style, accurate measurement is the fastest way to get a correct quotation. Follow the four steps below and state whether dimensions are in mm or inches.

STEP 01

Measure inside length A across the longest opening.

STEP 02

Measure inside width B across the shortest opening.

STEP 03

Measure gasket width b and total thickness s.

STEP 04

Send a drawing or a clear photo with a ruler in frame.

What Buyers Get From Kaxite

Made to your dimensions

No standard to match, so Kaxite builds to your A × B, width and thickness — or directly from your drawing. See our workshop.

No tooling cost, no MOQ

Oval and oblong profiles are wound on standard equipment. Single-piece orders for shutdown work are accepted at the same unit price structure.

Material matched to your boiler

SS304, SS316, SS321, Monel, Inconel and more, combined with graphite, PTFE or non-asbestos filler. See special materials.

Certificates with the goods

EN 10204 3.1 material certificates on request. Heat number traceable back to the incoming strip. See our certificates.

2-hour technical reply

The Kaxite technical sales team reviews your dimensions, media and temperature and comes back with a recommendation — not just a price.

Export-ready packing

Plastic film protection inside wooden pallets or cases suitable for sea and air freight. See packaging & shipping.

Typical Project Example

Boiler maintenance shutdown — oval handhole gaskets

A power plant maintenance team needed 12 oval spiral wound gaskets for boiler handhole covers. After confirming A × B × b × s and selecting SS316 winding with graphite filler, Kaxite produced the gaskets and shipped within 10 working days with EN 10204 3.1 certificates. This is a typical shutdown order: small quantity, fast lead time, full material traceability.

How to Order — Dimensions and Drawing

Because there is no standard for this gasket style, ordering depends entirely on the information you provide. The clearer the dimensions, the fewer rounds of confirmation and the faster the gasket ships. A drawing is best; if you do not have one, the format below is enough.

Gasket ordering example

SWG Oval (or Oblong) A × B × b × s Winding: AISI 316 Filler: Graphite

Where A = inside length, B = inside width, b = gasket width, s = gasket thickness. Please state the unit (mm or inch). If you have a drawing — PDF, DWG, DXF or a clear photograph with a ruler in frame — send that instead and Kaxite will read the dimensions directly.

STEP 01

You send dimensions A × B × b × s, or a drawing

STEP 02

Kaxite confirms feasibility and recommends winding metal + filler

STEP 03

Winding to the oval or oblong profile, welding, sizing

STEP 04

Dimensional check, marking, packing and shipment

Materials and Construction Options

Winding metal

  • SS 304 / 304L
  • SS 316 / 316L
  • SS 321
  • SS 347
  • SS 309
  • SS 310
  • SS 317L
  • Monel 400
  • Inconel 600 / 625 / 800
  • Hastelloy C276
  • Titanium Gr.2

Filler material

  • Flexible Graphite
  • PTFE
  • Non-Asbestos
  • Mica

For boiler handhole and manhole service the most common combination is SS316 winding with graphite filler — it handles saturated and superheated steam, resists the repeated open-and-close cycle, and does not degrade at boiler operating temperatures. Where the medium is more aggressive, Kaxite will advise on a special winding metal; see the special materials spiral wound gaskets range.

Material Selection Guide

Service
Saturated steam, low to medium pressure
Recommended winding
SS316 / SS316L
Recommended filler
Flexible graphite
Why
Good steam resistance, strong spring-back and reliable sealing under repeated open-and-close cycles.
Service
Superheated steam, high pressure
Recommended winding
SS316 or SS321
Recommended filler
Flexible graphite
Why
Thermal stability and resistance to high-temperature creep.
Service
Aggressive chemical media
Recommended winding
Monel 400, Inconel 625 or Hastelloy C276
Recommended filler
PTFE or non-asbestos
Why
Corrosion resistance matched to the process medium.
Service
High-temperature flue gas
Recommended winding
SS310
Recommended filler
Graphite or mica
Why
Oxidation resistance at elevated temperature.

Ring options

  • Basic (no rings) — winding only, for handhole and manhole seats where the recess itself centres and confines the gasket. This is the most common configuration for non-rounded gaskets.
  • With inner or outer ring — produced where the seat design allows a ring. Ring profiles on oval and oblong gaskets are made to match the cover geometry, not to a standard. Compare the CG outer ring version and CGI inner & outer ring version.

Technical Specifications

Model
KXT-630
Shapes
Oval (elliptical) · Oblong (elongated / stadium) · custom profile to drawing
Dimensioning
Inside length A × inside width B, gasket width b, thickness s — or supplied to drawing
Winding strip
Pre-formed V-shape, 0.15 – 0.25 mm thick
Filler strip
0.4 – 0.8 mm thick
Gasket thickness
Typically 3.2 mm and 4.5 mm; other thicknesses to drawing
Winding metal
SS304/304L, SS316/316L, SS321, SS347, SS309, SS310, SS317L, Monel 400, Inconel 600/625/800, Hastelloy C276, Titanium Gr.2
Filler
Flexible graphite · PTFE · non-asbestos · mica
Standard
No international standard exists for this style — each gasket is made to the customer's dimensions or drawing
Certificates
EN 10204 3.1 on request; third-party inspection (SGS / BV / TUV) supported
Marking
Size, winding material, filler and heat number marked on the gasket or its packaging
MOQ
No rigid MOQ; single-piece shutdown orders accepted
Lead time
Standard materials 7–15 working days from drawing confirmation; exotic alloys quoted against real mill availability

Typical Applications

  • Boiler handhole and manhole covers
  • Boiler drum inspection openings
  • Pressure vessel and tank access doors
  • Heat exchanger channel covers with non-circular openings — see heat exchanger spiral wound gaskets
  • Steam header and drum inspection ports
  • Any flanged joint with an oval, oblong or rectangular opening

Most of these gaskets go into power plants, boiler houses, petrochemical plants and general industrial steam systems. Related products in the same family include spiral wound gaskets, standard spiral wound gaskets, inner and outer ring constructions and ring joint gaskets.

Quality You Can Audit

  • Direct manufacturer. Kaxite winds, welds, sizes and inspects every gasket in its own workshop — full control over oval and oblong winding geometry, which is difficult to source from stockists. See our workshop.
  • Incoming material verification. Alloy strip checked by PMI / spectrometer before it reaches the winding machine, so the certificate matches the gasket.
  • Material traceability. Heat number on every batch and EN 10204 3.1 certificates on request. See our certificates.
  • 100% dimensional inspection. Inside length, inside width, gasket width, thickness and profile checked before packing.
  • Third-party inspection support. SGS, BV, TUV or client-nominated inspection can be arranged or hosted.
  • Boiler experience. Kaxite supplies handhole and manhole gaskets to boiler makers and power plant maintenance teams, so the repeated open-and-close cycle of these joints is well understood.
Dimensional inspection of non-rounded spiral wound gaskets
100% dimensional inspection before packing — inside length, width, gasket width and thickness.

Buyer FAQ

Is there a standard for oval and oblong spiral wound gaskets?

No. There is no international standard covering this gasket style, so each gasket is produced to the customer's dimensions or drawing. This is why Kaxite asks for A × B × b × s or a drawing rather than a standard part number.

What information do I need to provide for a quotation?

Inside length A, inside width B, gasket width b, thickness s, winding metal, filler material, quantity and required delivery date. A drawing in PDF, DWG or DXF is even better. Please state whether dimensions are in mm or inches.

Can I send a photo instead of a drawing?

Yes — a clear photo of the opening or the old gasket with a ruler or tape measure in frame is usually enough. Kaxite will read the profile and dimensions and confirm back before quoting.

Can you produce a rectangular or custom-shaped gasket?

Yes, within the practical limits of spiral winding. Rounded-rectangle and pass-partition profiles are routine. Send the drawing and Kaxite will confirm feasibility.

What is the minimum order quantity?

No rigid minimum. Kaxite regularly supplies single pieces for boiler maintenance and shutdown work. Larger quantities are quoted at a lower unit price.

Do you supply material certificates?

Yes. EN 10204 3.1 certificates are available on request, and third-party inspection (SGS, BV, TUV or client-nominated) can be arranged or hosted at additional cost. See our certificates.

How long does production take?

Standard materials normally ship within 7–15 working days of drawing confirmation. Custom profiles and exotic winding metals may take longer; Kaxite will state a realistic date in the quotation.

Can I get a sample before ordering a batch?

For this product style, samples are usually made to your dimensions rather than supplied from stock, so sample and batch are effectively the same production run. Kaxite can supply a single-piece trial order before a larger batch.

What payment terms do you accept?

Normally T/T with a 30% deposit and balance before shipment. L/C at sight can be discussed for larger orders. Terms are confirmed in the quotation.

Send Your Dimensions — Get a Quote in 2 Business Hours

Send the inside length A, inside width B, gasket width and thickness, plus winding metal and filler. Or simply send a drawing, or a clear photo with a ruler in frame — Kaxite will read the profile and come back with a technical recommendation, price and delivery date.

Send Inquiry Now
Send Inquiry
Contact Info

Request a Quote or Technical Consultation

Share your sealing requirement and our technical sales team will respond within 24 business hours. For fastest service, include your flange specification, operating pressure, temperature, and process media in the message below.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept