Gaskets

Non-asbestos Rubber Gasket Synthetic Fiber gasket cut from Synthetic Fiber rubber sheet. Suitable for use as an oil-resistant jointing medium for heat installations and engine sealing.

KXT-1100 Kammprofile gasket basic style is a guide-ring-free semi-metallic gasket built on a concentrically serrated SS 316L/304 core with graphite or PTFE facing on both sealing surfaces. Without inner or outer rings, it seats directly in tongue-and-groove, male-female and recessed flanges where the flange geometry performs the centering function. Typically specified as an upgrade to double jacketed gaskets in heat exchanger and narrow-flange service, especially where bolt load is limited. Custom sizes and material combinations quoted factory-direct within 24 business hours.

KXT-1120 Kammprofile gasket uses a concentrically serrated SS 316L/304 core with a loose, floating outer ring seated in a turned groove on the core circumference. The independent ring accommodates radial thermal expansion without stressing the core, making it the preferred configuration for large-diameter flanges and severe thermal cycling in heat exchanger and high-pressure piping service. Graphite or PTFE facing on both sealing surfaces; ASME B16.5 / EN12560-6 geometry; custom sizes quoted factory-direct within 24 business hours.

KXT-1130 Kammprofile gasket combines a concentrically serrated SS 316L/304 core with a machined integral outer ring for self-centering on raised-face and flat-face flanges. Graphite or PTFE facing on both sealing surfaces delivers high-integrity sealing at elevated pressure and temperature, and the reusable core reduces lifecycle cost in heat exchanger and high-pressure flange service. Standard OD DN 15–600 per ASME B16.5 Class 150–2500; custom sizes to 2000 mm on drawing. Factory-direct quote within 24 business hours.

KXT-1500 asbestos rubber gasket is die-cut from white chrysotile fiber sheet with a rubber binder, rated to 2.0 MPa and 200°C for low-pressure steam, water, gas and neutral-media flange service. Supplied for regulated industrial maintenance and legacy equipment where asbestos-containing gaskets remain permitted. Custom OD up to 1500 mm; compliance documentation and safe-handling instructions included with every shipment.

KXT-1500 mineral fiber rubber gaskets are die-cut from non-asbestos mineral fiber + NBR rubber sheet, rated to 2.0 MPa and 200°C for continuous service. The oil-resistant grade is specified for engine sealing, heat installations and flange joints where asbestos-free compliance is mandatory. Custom OD up to 1500 mm; bulk and OEM supply direct from Kaxite.